senha vazios.",
"Password" : "Senha",
"For anonymous access, leave DN and Password empty." : "Para acesso anônimo, deixe DN e senha vazios.",
"Save Credentials" : "Salvar credenciais",
"One Base DN per line" : "Uma Base DN por linha",
"You can specify Base DN for users and groups in the Advanced tab" : "Você pode especificar a Base DN para usuários e grupos na aba Avançada",
"Detect Base DN" : "Detectar a Base DN",
"Test Base DN" : "Testar a Base DN",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "Evita solicitações LDAP automáticos. Melhor para configurações maiores, mas requer algum conhecimento LDAP.",
"Manually enter LDAP filters (recommended for large directories)" : "Inserir manualmente filtros LDAP (recomendado para grandes diretórios)",
"Listing and searching for users is constrained by these criteria:" : "Listar e pesquisar usuários é limitado por esses critérios:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "As classes de objetos mais comuns para os usuários são organizationalPerson, person, user e inetOrgPerson. Se você não tem certeza de qual classe de objeto selecionar, por favor, consulte o administrador do diretório.",
"The filter specifies which LDAP users shall have access to the %s instance." : "O filtro especifica quais usuários LDAP devem ter acesso à instância do %s.",
"Verify settings and count users" : "Verificar configurações e contas de usuários",
"Saving" : "Salvando",
"Back" : "Voltar",
"Continue" : "Continuar",
"Please renew your password." : "Por favor, redigite sua senha.",
"An internal error occurred." : "Um erro interno aconteceu.",
"Please try again or contact your administrator." : "Tente novamente ou contacte o administrador.",
"Current password" : "Senha atual",
"New password" : "Senha nova",
"Renew password" : "Renovar a senha",
"Wrong password." : "Senha incorreta.",
"Cancel" : "Cancelar",
"Server" : "Servidor",
"Users" : "Usuários",
"Login Attributes" : "Atributos de Acesso",
"Groups" : "Grupos",
"Expert" : "Especialista",
"Advanced" : "Avançado",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "Aviso: O módulo PHP LDAP não está instalado e a plataforma de serviço não funcionará. Por favor, peça ao administrador do sistema para instalá-lo.",
"Connection Settings" : "Configurações de conexão",
"Configuration Active" : "Configuração em uso",
"When unchecked, this configuration will be skipped." : "Quando desmarcada, esta configuração será ignorada.",
"Backup (Replica) Host" : "Host de backup (Réplica)",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "Defina um servidor de backup opcional. Ele deverá ser uma réplica do servidor LDAP/AD principal.",
"Backup (Replica) Port" : "Porta de backup (Réplica)",
"Disable Main Server" : "Desativar Servidor Principal",
"Only connect to the replica server." : "Conectar-se somente ao servidor Réplica.",
"Turn off SSL certificate validation." : "Desligar validação de certificado SSL.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "Não recomendado, use-o somente para teste! Se a conexão só funciona com esta opção, importe o certificado SSL do servidor LDAP em seu servidor %s.",
"Cache Time-To-Live" : "Cache Time-To-Live",
"in seconds. A change empties the cache." : "em segundos. Uma alteração esvazia o cache.",
"Directory Settings" : "Configurações de diretório",
"User Display Name Field" : "Campo de nome de exibição do usuário",
"The LDAP attribute to use to generate the user's display name." : "O atributo LDAP a usar para gerar o nome de exibição do usuário.",
"2nd User Display Name Field" : "2º Campo Nome de Exibição de Usuário",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "Opcional. Um atributo LDAP para ser adicionado ao nome de exibição entre colchetes. Resulta em ex. »John Doe (john.doe@example.org)«.",
"Base User Tree" : "Árvore de Usuário Base",
"One User Base DN per line" : "Um usuário de Base DN por linha",
"User Search Attributes" : "Atributos de Busca de Usuário",
"Optional; one attribute per line" : "Opcional; um atributo por linha",
"Group Display Name Field" : "Campo de nome de exibição do Grupo",
"The LDAP attribute to use to generate the groups's display name." : "O atributo LDAP a usar para gerar o nome de apresentação do grupo.",
"Base Group Tree" : "Árvore de Grupo Base",
"One Group Base DN per line" : "Um grupo Base DN por linha",
"Group Search Attributes" : "Atributos de Busca de Grupo",
"Group-Member association" : "Associação Grupo-Membro",
"Dynamic Group Member URL" : "URL de Membro de Grupo Dinâmico",
"The LDAP attribute that on group objects contains an LDAP search URL that determines what objects belong to the group. (An empty setting disables dynamic group membership functionality.)" : "O atributo LDAP que em objetos do grupo contém uma pesquisa URL LDAP que determina quais objetos pertencem ao grupo. (Um cenário vazio desativa a funcionalidade de membros de grupo dinâmico.)",
"Nested Groups" : "Grupos Aninhados",
"When switched on, groups that contain groups are supported. (Only works if the group member attribute contains DNs.)" : "Quando habilitado, os grupos que contêm os grupos são suportados. (Só funciona se o atributo de membro de grupo contém DNs.)",
"Paging chunksize" : "Bloco de paginação",
"Chunksize used for paged LDAP searches that may return bulky results like user or group enumeration. (Setting it 0 disables paged LDAP searches in those situations.)" : "Tamanho do bloco usado para pesquisas LDAP paginadas que podem retornar resultados volumosos como usuário ou enumeração de grupo. (Defini-lo como 0 desativa as pesquisas LDAP paginadas nessas situações.)",
"Enable LDAP password changes per user" : "Ativar alteração de senha LDAP por usuário",
"Allow LDAP users to change their password and allow Super Administrators and Group Administrators to change the password of their LDAP users. Only works when access control policies are configured accordingly on the LDAP server. As passwords are sent in plaintext to the LDAP server, transport encryption must be used and password hashing should be configured on the LDAP server." : "Permite que usuários LDAP alterem senha e permite que o Super Administrador e o Administradores de grupo troquem a senha dos usuários LDAP. Só funciona quando as políticas de controle de acesso estão configuradas de acordo com o servidor LDAP. As senhas são enviadas em texto puro ao servidor LDAP. Criptografia de transporte deve ser usada e a hash da senha deve ser configurada no servidor LDAP. ",
"(New password is sent as plain text to LDAP)" : "(Nova senha é enviada como texto puro para o LDAP)",
"Default password policy DN" : "DN da política de senha padrão",
"The DN of a default password policy that will be used for password expiry handling. Works only when LDAP password changes per user are enabled and is only supported by OpenLDAP. Leave empty to disable password expiry handling." : "O DN da política de senha padrão que será usada para gerenciar a expiração de senha. Funciona somente quando as alterações por usuários das senhas LDAP estão habilitadas e é somente suportado por OpenLDAP. Deixe em branco para desativar a expiração de senha.",
"Special Attributes" : "Atributos especiais",
"Quota Field" : "Campo de cota",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "Deixe vazio para a cota padrão do usuário. Caso contrário, especifique um atributo LDAP/AD",
"Quota Default" : "Cota Padrão",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "Substituir a cota padrão para usuários LDAP que não têm um conjunto de cotas no Campo Cota.",
"Email Field" : "Campo de e-mail",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "Defina o e-mail do usuário de seu atributo LDAP. Deixe vazio para o comportamento padrão.",
"User Home Folder Naming Rule" : "Regra de nomeação de pasta de usuário Home",
"Leave empty for username (default). Otherwise, specify an LDAP/AD attribute." : "Deixe em branco para o nome de usuário (padrão). Caso contrário, especifique um atributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Campo Reservado \"$home\"",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home em uma configuração de armazenamento externo será substituído pelo valor do atributo especificado",
"Internal Username" : "Nome de usuário interno",
"Internal Username Attribute:" : "Atributo Interno de Nome de Usuário:",
"Override UUID detection" : "Substituir detecção UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Por padrão, o atributo UUID é detectado automaticamente. O atributo UUID é usado para identificar corretamente os usuários e grupos LDAP. Além disso, o nome de usuário interno será criado com base no UUID, se não especificado acima. Você pode substituir a configuração e passar um atributo de sua escolha. Você deve certificar-se de que o atributo de sua escolha pode ser lido tanto por usuários quanto por grupos, e que seja único. Deixe-o em branco para o comportamento padrão. As alterações terão efeito apenas para usuários e grupos LDAP recém mapeados (adicionados).",
"UUID Attribute for Users:" : "Atributos UUID para Usuários:",
"UUID Attribute for Groups:" : "Atributos UUID para Grupos:",
"Username-LDAP User Mapping" : "Mapeamento de Usuário Username-LDAP",
"Usernames are used to store and assign metadata. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Os nomes de usuários são usados para armazenar e atribuir metadados. Para identificar e reconhecer com precisão os usuários, cada usuário LDAP terá um nome de usuário interno. Isso requer um mapeamento do nome de usuário para o usuário LDAP. O nome de usuário criado é mapeado para o UUID do usuário LDAP. Além disso, o DN também é armazenado em cache para reduzir a interação LDAP, mas não é usado para identificação. Se o DN mudar, as alterações serão encontradas. O nome de usuário interno é usado em todo lugar. Limpar os mapeamentos gerará sobras em todos os lugares. Limpar os mapeamentos não é sensível à configuração e afeta todas as configurações do LDAP! Nunca limpe os mapeamentos em um ambiente de produção, apenas em um estágio de teste ou experimental.",
"Clear Username-LDAP User Mapping" : "Limpar Mapeamento de Usuário username-LDAP",
"Clear Groupname-LDAP Group Mapping" : "Limpar Mapeamento do Grupo groupname-LDAP",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Por padrão, o nome de usuário interno será criado a partir do atributo UUID. Isso garante que o nome de usuário seja único e os caracteres não precisem ser convertidos. O nome de usuário interno tem a restrição de que apenas estes caracteres são permitidos: [a-zA-Z0-9 _. @ -]. Outros caracteres são substituídos por sua correspondência ASCII ou simplesmente omitidos. Em colisões, um número será adicionado / aumentado. O nome de usuário interno é usado para identificar um usuário internamente. É também o nome padrão da pasta inicial do usuário. Também faz parte de URLs remotos, por exemplo, para todos os serviços * DAV. Com essa configuração, o comportamento padrão pode ser substituído. As alterações terão efeito apenas em usuários LDAP recém-mapeados (adicionados). Deixe em branco para o comportamento padrão."
},
"nplurals=2; plural=(n > 1);");
OC.L10N.register(
"user_ldap",
{
"_%s group found_::_%s groups found_" : ["",""],
"_%s user found_::_%s users found_" : ["",""]
},
"nplurals=2; plural=(n > 1);");
{ "translations": {
"Failed to clear the mappings." : "Se presentó una falla al borrar los mapeos.",
"Failed to delete the server configuration" : "Se presentó una falla al borrar la configuración del servidor",
"Invalid configuration: Anonymous binding is not allowed." : "Configuración inválida: La vinculación anónima no está permitida. ",
"Valid configuration, connection established!" : "¡Configuración válida, conexión establecida!",
"Valid configuration, but binding failed. Please check the server settings and credentials." : "Configuración válida, pero la vinculación falló. Por favor verifica la configuración del servidor y las credenciales.",
"Invalid configuration. Please have a look at the logs for further details." : "Configuración inválida. Por favor verifica las bitácoras para más detalles.",
"No action specified" : "No se ha especificado alguna acción",
"No configuration specified" : "No se ha especificado una configuración",
"No data specified" : "No se han especificado datos",
" Could not set configuration %s" : "No fue posible establecer la configuración %s",
"Action does not exist" : "La acción no existe",
"Renewing …" : "Renovando ...",
"Very weak password" : "Contraseña muy debil",
"Weak password" : "Contraseña débil",
"So-so password" : "Contraseña aceptable",
"Good password" : "Buena contraseña",
"Strong password" : "Contraseña fuerte",
"The Base DN appears to be wrong" : "El DN Base parece estar incorrecto",
"Testing configuration…" : "Probando configuración... ",
"Configuration incorrect" : "Configuración Incorrecta",
"Configuration incomplete" : "Configuración incompleta",
"Configuration OK" : "Configuración correcta",
"Select groups" : "Seleccionar grupos",
"Select object classes" : "Seleccionar las clases de objeto",
"Please check the credentials, they seem to be wrong." : "Por favor verifica tus credenciales, al parecer están equivocadas.",
"Please specify the port, it could not be auto-detected." : "No fue posible auto-detectar el puerto, por favor especifícalo.",
"Base DN could not be auto-detected, please revise credentials, host and port." : "No fue posible auto detectar el DN Base, por favor verifica las credenciales, servidor y puerto.",
"Could not detect Base DN, please enter it manually." : "No fue posible detectar el DN Base, por favor ingreésalo manualmente.",
"{nthServer}. Server" : "{nthServer}. Servidor",
"No object found in the given Base DN. Please revise." : "No fue posible encontrar ningún objeto en el DN Base dado. Por favor verifica.",
"More than 1,000 directory entries available." : "Se encuentran disponibles más de 1,000 elementos de directoiros. ",
"_{objectsFound} entry available within the provided Base DN_::_{objectsFound} entries available within the provided Base DN_" : ["{objectsFound} registro disponible dentro del DN base proporcionado","{objectsFound} registros disponibles dentro del DN base proporcionado"],
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Se presentó un error. Por favor verifica la DN Base, así como las configuraciones de la conexión y las credenciales.",
"Do you really want to delete the current Server Configuration?" : "¿Realmente deseas eliminar la configuración actual del servidor?",
"Confirm Deletion" : "Confirmar el borrado",
"Mappings cleared successfully!" : "¡Los mapeos se borraron exitosamente!",
"Error while clearing the mappings." : "Se presentó un error al borrar los mapeos. ",
"Anonymous bind is not allowed. Please provide a User DN and Password." : "La vinculación anónima no está permitida. Por favor proporciona un Usuario DN y una Contaseña.",
"LDAP Operations error. Anonymous bind might not be allowed." : "Error de Operaciones LDAP. Las vinculaciones anónimas pueden no estar permitidas. ",
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "Se presentó una falla en el guardado. Por favor verifica que la base de datos esté operando. Vuelve a cargar antes de continuar. ",
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "Cambiar la modalidad habilitará las consultas automaticas de LDAP. Dependiendo del tamaño de su LDAP esto puede tomar algun tiempo. ¿Aún desea cambiar la modalidad?",
"Mode switch" : "Cambio de modo",
"Select attributes" : "Seleccionar atributos",
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command-line validation):
" : "Usuario no encontrado. Por favor verifica tus atributos de inicio de sesión y tu usuario. Filtro aplicado (para copiar-y-pegar para una validación de línea de comando):
",
"User found and settings verified." : "Usuario encontrado y configuraciones verificadas. ",
"Consider narrowing your search, as it encompassed many users, only the first one of whom will be able to log in." : "Considera refinar la búsqueda, ya que abarca demasiados usuarios y solo el primero de ellos podrá iniciar sesión. ",
"An unspecified error occurred. Please check log and settings." : "Se presentó un error inesperado. Por fvor verifica la bitácora y las configuraciones.",
"The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtro de la búsqueda es inválido, posiblemente debido a temas de sintaxis como un número diferente de corchetes abiertos y cerrados. Por favor verifícalo. ",
"Please provide a login name to test against" : "Favor de proporcionar un nombre de usuario contra el cual probar",
"Password change rejected. Hint: " : "Cambio de contraseña rechazado. Pista: ",
"Please login with the new password" : "Por favor inicia sesion con la nueva contraseña",
"Your password will expire tomorrow." : "Tu contraseña expirará mañana.",
"Your password will expire today." : "Tu contraseña expirará el día de hoy. ",
"_Your password will expire within %n day._::_Your password will expire within %n days._" : ["La contraseña expirará dentro de %n día. ","La contraseña expirará dentro de %n días. "],
"_%s group found_::_%s groups found_" : ["Grupo %s encontrado","%s grupos encontrados"],
"_%s user found_::_%s users found_" : ["Usuario %s encontrado","%s usuarios encontrados"],
"Could not detect user display name attribute. Please specify it yourself in advanced LDAP settings." : "No fue posible detectar el atributo del nombre a desplegar del usuario. Por favor especifícalo tú mismo en las configuraciones avanzadas de LDAP. ",
"Could not find the desired feature" : "No fue posible encontrar la función deseada.",
"Invalid Host" : "Servidor inválido",
"LDAP user and group backend" : "Backend de LDAP para usuario y grupo",
"Test Configuration" : "Probar configuración",
"Help" : "Ayuda",
"Groups meeting these criteria are available in %s:" : "Los grupos que cumplen con los siguientes criterios están disponibles en %s:",
"Only these object classes:" : "Sólo estas clases de objetos:",
"Only from these groups:" : "Sólo desde estos grupos:",
"Search groups" : "Buscar grupos",
"Available groups" : "Grupos disponibles",
"Selected groups" : "Grupos seleccionados",
"Edit LDAP Query" : "Editar consulta a LDAP",
"LDAP Filter:" : "Filtro de LDAP:",
"The filter specifies which LDAP groups shall have access to the %s instance." : "El filtro especifica cuales grupos LDAP tendrán acceso a la instancia %s.",
"Verify settings and count the groups" : "Verificar las configuraciones y contar los grupos",
"When logging in, %s will find the user based on the following attributes:" : "Al iniciar sesion, %s encontrará al usuario con base en los siguientes atributos:",
"Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite iniciar sesión contra el atributo de email. \"mail\" y \"mailPrimaryAddresw\" está permitido. ",
"Other Attributes:" : "Otros atributos:",
"Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define el filtro a aplicar cuando se intenta iniciar sesión. \"%% uid\" remplaza el usuario en la acción de inicio de sesión. Ejemplo: \"uid=%% uid\"",
"Test Loginname" : "Probar nombre de usuario",
"Verify settings" : "Verificar configuraciones ",
"%s. Server:" : "%s. Servidor:",
"Add a new configuration" : "Agregar una nueva configuración",
"Copy current configuration into new directory binding" : "Copiar la configuración actual a un nuevo directorio de vinculación",
"Delete the current configuration" : "Borrar la configuración actual",
"Host" : "Servidor",
"You can omit the protocol, unless you require SSL. If so, start with ldaps://" : "Puedes omitir el protocolo, a menos que requiera SSL. Si es el caso, empieza con ldaps://",
"Port" : "Puerto",
"Detect Port" : "Detectar Puerto",
"User DN" : "DN del usuario",
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "El DN del cliente del usuario con el que se vinculará, ejem. uid=agente,dc=ejemplo,dc=com. Para tener un acceso anónimo, deja el DN y la contraseña vacíos.",
"Password" : "Contraseña",
"For anonymous access, leave DN and Password empty." : "Para acceso anónimo, deja la contraseña y DN vacíos.",
"Save Credentials" : "Guardar credenciales",
"One Base DN per line" : "Un DN Base por línea",
"You can specify Base DN for users and groups in the Advanced tab" : "Puedes especificar el DN Base para usuarios y grupos en la pestaña Avanzado",
"Detect Base DN" : "Detectar DN Base",
"Test Base DN" : "Probar el DN Base",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "Evita solicitudes automaticas de LDAP. Es mejor para ambientes más grandes pero requiere mayor conocimiento de LDAP. ",
"Manually enter LDAP filters (recommended for large directories)" : "Ingresar los filtros LDAP manualmente (recomendado para directorios grandes)",
"Listing and searching for users is constrained by these criteria:" : "Los enlistados y las busquedas para los usuarios están acotados por estos criterios:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "Las clases de objetos más comunes para usuarios son organizationalPerson, person, user, and inetOrgPerson. Si no estás seguro de cuál clase de objeto selecciónar, por favor consulta tu directorio admin.",
"The filter specifies which LDAP users shall have access to the %s instance." : "El filtro especifica cuáles usuarios LDAP tendrán acceso a la instancia %s.",
"Verify settings and count users" : "Verificar configuraciones y contar ususarios",
"Saving" : "Guardando",
"Back" : "Atrás",
"Continue" : "Continuar",
"Please renew your password." : "Por favor renueva tu contraseña.",
"An internal error occurred." : "Se presentó un error interno. ",
"Please try again or contact your administrator." : "Por favor inténtarlo de nuevo o contacta a tu administrador. ",
"Current password" : "Contraseña actual",
"New password" : "Nueva contraseña",
"Renew password" : "Renovar contraseña",
"Wrong password." : "Contraseña incorrecta. ",
"Cancel" : "Cancelar",
"Server" : "Servidor",
"Users" : "Usuarios",
"Login Attributes" : "Atributos de Inicio de Sesión",
"Groups" : "Grupos",
"Expert" : "Experto",
"Advanced" : "Avanzado",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "Advertencia: El módulo LDAP de PHP no está instalado, el backend no funcionará. Por favor solicita su instalación a tu administrador del sistema.",
"Connection Settings" : "Configuraciones de la conexión",
"Configuration Active" : "Configuracion Activa",
"When unchecked, this configuration will be skipped." : "Cuando no esté seleccionada, esta configuración será omitida.",
"Backup (Replica) Host" : "Servidor de copia de seguridad (Replica)",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "Por favor proporciona un servidor de copia de seguridad opcional. Debe ser una réplica del servidor LDAP / AD principal.",
"Backup (Replica) Port" : "Puerto para copias de seguridad (Réplica)",
"Disable Main Server" : "Deshabilitar servidor principal",
"Only connect to the replica server." : "Sólo contectarse al servidor de réplica.",
"Turn off SSL certificate validation." : "Deshabilitar la validación del certificado SSL.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "¡No se recomienda, úsalo únicamente para pruebas! Si la conexión sólo funciona con esta opción, importa el certificado SSL del servidor LDAP a tu servidor %s.",
"Cache Time-To-Live" : "Tiempo de vida del caché",
"in seconds. A change empties the cache." : "en segundos. Un cambio vacía la caché.",
"Directory Settings" : "Configuraciones del directorio",
"User Display Name Field" : "Campo de Nombre a Desplegar del Usuario",
"The LDAP attribute to use to generate the user's display name." : "El atributo LDAP a usar para generar el nombre del usuario a desplegar.",
"2nd User Display Name Field" : "2do Campo de Nombre a Desplegar del Usuario",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "Opcional. Un atributo LDAP puede ser agregado al nombre a despelegar entre corchetes. Ejemplos de resultados »John Doe (john.doe@example.org)«.",
"Base User Tree" : "Árbol de Usuario Base",
"One User Base DN per line" : "Un Usuario Base de DN por línea",
"User Search Attributes" : "Atributos de búsqueda de usuario",
"Optional; one attribute per line" : "Opcional; un atributo por línea",
"Group Display Name Field" : "Campo de Nombre de Grupo a Desplegar",
"The LDAP attribute to use to generate the groups's display name." OC.L10N.register(
"user_ldap",
{
"Failed to clear the mappings." : "Xəritələnməni silmək mümkün olmadı",
"Failed to delete the server configuration" : "Server configini silmək mümkün olmadı",
"The configuration is valid and the connection could be established!" : "Configurasiya doğrudur və qoşulmaq mümkündür!",
"The configuration is valid, but the Bind failed. Please check the server settings and credentials." : "Configurasiya doğrudur yalnız, birləşmədə səhv oldu. Xahiş olunur server quraşdırmalarını və daxil etdiyiniz verilənlərin düzgünlüyünü yoxlayasınız.",
"The configuration is invalid. Please have a look at the logs for further details." : "Configurasiya dügün deyil. Əlavə detallar üçün xahiş edirik jurnal faylına baxasınız.",
"No action specified" : "Heç bir iş təyin edilməyib",
"No configuration specified" : "Təyin edilmiş konfiqurasiya yoxdur",
"No data specified" : "Təyin edilmiş data yoxdur",
" Could not set configuration %s" : "%s configi təyin etmək mümkün olmadı",
"Configuration incorrect" : "Konfiqurasiya düzgün deyil",
"Configuration incomplete" : "Konfiqruasiya bitmiş deyil",
"Configuration OK" : "Konfiqurasiya OK-dir",
"Select groups" : "Qrupları seç",
"Select object classes" : "object class-larını seç",
"{nthServer}. Server" : "{nthServer}. Server",
"Do you really want to delete the current Server Configuration?" : "Siz hal-hazırki server konfiqini silmək istədiyinizdən həqiqətən əminsinizmi?",
"Confirm Deletion" : "Silinmənin təsdiqi",
"Select attributes" : "Atributları seç",
"_%s group found_::_%s groups found_" : ["%s qruplar tapıldı","%s qruplar tapıldı"],
"_%s user found_::_%s users found_" : ["%s istifadəçilər tapıldı","%s istifadəçilər tapıldı"],
"Could not detect user display name attribute. Please specify it yourself in advanced ldap settings." : "İstifadəçinin ekran atributu adını təyin etmək mümkün deyil. Xahiş olunur sizin özünüz onu əllə ldap konfiqində təyin edəsiniz.",
"Could not find the desired feature" : "Arzulanılan imkanı tapmaq mümkün deyil",
"Invalid Host" : "Yalnış Host",
"Server" : "Server",
"Users" : "İstifadəçilər",
"Groups" : "Qruplar",
"Test Configuration" : "Konfiqurasiya testi",
"Help" : "Kömək",
"Host" : "Şəbəkədə ünvan",
"Port" : "Port",
"Password" : "Şifrə",
"Advanced" : "İrəliləmiş"
},
"nplurals=2; plural=(n != 1);");
OC.L10N.register(
"user_ldap",
{
"Failed to clear the mappings." : "Löschen der Zuordnungen fehlgeschlagen.",
"Failed to delete the server configuration" : "Löschen der Serverkonfiguration fehlgeschlagen",
"Invalid configuration: Anonymous binding is not allowed." : "Die Konfiguration ist ungültig: anonymes Binden ist nicht erlaubt. ",
"Valid configuration, connection established!" : "Gültige Konfiguration, Verbindung hergestellt!",
"Valid configuration, but binding failed. Please check the server settings and credentials." : "Die Konfiguration ist gültig, aber der LDAP-Bind ist fehlgeschlagen. Bitte überprüfen Sie die Servereinstellungen und die Anmeldeinformationen. ",
"Invalid configuration. Please have a look at the logs for further details." : "Die Konfiguration ist ungültig. Weitere Details finden Sie in den Protokolldateien. ",
"No action specified" : "Keine Aktion angegeben",
"No configuration specified" : "Keine Konfiguration angegeben",
"No data specified" : "Keine Daten angegeben",
" Could not set configuration %s" : "Die Konfiguration %s konnte nicht gesetzt werden",
"Action does not exist" : "Aktion existiert nicht",
"Renewing …" : "Erneuere …",
"Very weak password" : "Sehr schwaches Passwort",
"Weak password" : "Schwaches Passwort",
"So-so password" : "Akzeptables Passwort",
"Good password" : "Gutes Passwort",
"Strong password" : "Starkes Passwort",
"The Base DN appears to be wrong" : "Die Base-DN scheint falsch zu sein",
"Testing configuration…" : "Teste Konfiguration",
"Configuration incorrect" : "Konfiguration nicht korrekt",
"Configuration incomplete" : "Konfiguration nicht vollständig",
"Configuration OK" : "Konfiguration OK",
"Select groups" : "Gruppen auswählen",
"Select object classes" : "Objektklassen auswählen",
"Please check the credentials, they seem to be wrong." : "Bitte überprüfen Sie die Anmeldeinformationen, sie sind anscheinend falsch.",
"Please specify the port, it could not be auto-detected." : "Bitte geben Sie den Port an, er konnte nicht automatisch erkannt werden.",
"Base DN could not be auto-detected, please revise credentials, host and port." : "Die Base DN konnte nicht automatisch erkannt werden, bitte überprüfen Sie Anmeldeinformationen, Host und Port.",
"Could not detect Base DN, please enter it manually." : "Die Base DN konnte nicht erkannt werden, bitte geben Sie sie manuell ein.",
"{nthServer}. Server" : "{nthServer}. - Server",
"No object found in the given Base DN. Please revise." : "Keine Objekte in der angegebenen Base-DN gefunden, bitte überprüfen.",
"More than 1,000 directory entries available." : "Es sind mehr als 1.000 Verzeichniseinträge verfügbar.",
"_{objectsFound} entry available within the provided Base DN_::_{objectsFound} entries available within the provided Base DN_" : ["{objectsFound} Eintrag in der angegebenen Base DN verfügbar","{objectsFound} Einträge in der angegebenen Base DN verfügbar"],
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Es ist ein Fehler aufgetreten. Bitte überprüfen Sie die Base DN wie auch die Verbindungseinstellungen und Anmeldeinformationen.",
"Do you really want to delete the current Server Configuration?" : "Möchten Sie die aktuelle Serverkonfiguration wirklich löschen?",
"Confirm Deletion" : "Löschen bestätigen",
"Mappings cleared successfully!" : "Zuordnungen erfolgreich gelöscht!",
"Error while clearing the mappings." : "Fehler beim Löschen der Zuordnungen.",
"Anonymous bind is not allowed. Please provide a User DN and Password." : "Anonymous Bind ist nicht erlaubt. Bitte geben Sie eine Benutzer-DN und ein Passwort angeben.",
"LDAP Operations error. Anonymous bind might not be allowed." : "Fehler in den LDAP-Operationen. Anonymous Bind ist anscheinend nicht erlaubt.",
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "Speichern fehlgeschlagen. Bitte stellen Sie sicher, dass die Datenbank in Betrieb ist. Bitte laden Sie vor dem Fortfahren neu.",
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "Das Umschalten des Modus ermöglicht automatische LDAP-Abfragen. Abhängig von Ihrer LDAP-Größe können diese einige Zeit in Anspruch nehmen. Wollen Sie immer noch den Modus wechseln?",
"Mode switch" : "Modus umschalten",
"Select attributes" : "Attribute auswählen",
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command-line validation):
" : "Benutzer nicht gefunden. Bitte überprüfen Sie Ihre Anmelde-Attribute und Benutzernamen. Wirksamer Filter (zum Kopieren und Einfügen bei der Überprüfung auf der Kommandozeile):
",
"User found and settings verified." : "Benutzer gefunden und Einstellungen überprüft.",
"Consider narrowing your search, as it encompassed many users, only the first one of whom will be able to log in." : "Erwägen Sie, Ihre Suche einzugrenzen, da sie viele Benutzer umfaßte. Nur der erste wird sich anmelden können.",
"An unspecified error occurred. Please check log and settings." : "Es ist ein ein nicht näher spezifizierter Fehler aufgetreten. Bitte prüfen Sie die Protokolldatei und die Einstellungen.",
"The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.",
"A connection error to LDAP/AD occurred. Please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten, bitte überprüfen Sie Host, Port und Anmeldeinformationen.",
"The \"%uid\" placeholder is missing. It will be replaced with the login name when querying LDAP/AD." : "Der \"%u id\" Platzhalter fehlt. Er wird durch den Anmeldenamen ersetzt, wenn LDAP/AD abgefragt wird.",
"Please provide a login name to test against" : "Bitte geben Sie einen Benutzernamen an, um gegen diesen zu testen",
"The group box was disabled, because the LDAP/AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP/AD-Server memberOf nicht unterstützt.",
"Password change rejected. Hint: " : "Passwortänderung verweigert. Hinweis:",
"Please login with the new password" : "Bitte mit dem neuen Passwort anmelden",
"LDAP User backend" : "LDAP Benutzer-Backend",
"Your password will expire tomorrow." : "Ihr Passwort läuft morgen ab.",
"Your password will expire today." : "Ihr Passwort läuft heute ab.",
"_Your password will expire within %n day._::_Your password will expire within %n days._" : ["Ihr Passwort läuft in %n Tag ab.","Ihr Passwort läuft in %n Tagen ab."],
"LDAP/AD integration" : "LDAP/AD-Integration",
"_%s group found_::_%s groups found_" : ["%s Gruppe gefunden","%s Gruppen gefunden"],
"_%s user found_::_%s users found_" : ["%s Benutzer gefunden","%s Benutzer gefunden"],
"Could not detect user display name attribute. Please specify it yourself in advanced LDAP settings." : "Das Anzeigename-Attribut des Benutzers konnte nicht gefunden werden. Bitte geben Sie es selbst in den erweiterten LDAP-Einstellungen an.",
"Could not find the desired feature" : "Die gewünschte Funktion konnte nicht gefunden werden",
"Invalid Host" : "Ungültiger Host",
"LDAP user and group backend" : "LDAP Benutzer- und Gruppen-Backend",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory." : "Diese App ermöglicht es Administratoren, Nextcloud mit einem LDAP-basierten Benutzerverzeichnis zu verbinden.",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory for authentication and provisioning users, groups and user attributes. Admins can configure this application to connect to one or more LDAP directories or Active Directories via an LDAP interface. Attributes such as user quota, email, avatar pictures, group memberships and more can be pulled into Nextcloud from a directory with the appropriate queries and filters.\n\nA user logs into Nextcloud with their LDAP or AD credentials, and is granted access based on an authentication request handled by the LDAP or AD server. Nextcloud does not store LDAP or AD passwords, rather these credentials are used to authenticate a user and then Nextcloud uses a session for the user ID. More information is available in the LDAP User and Group Backend documentation." : "Diese App ermöglicht es Administratoren Nextcloud mit einem auf LDAP basierenden Nutzerverzeichnis zu verbinden um so die Anmeldung, Nutzer, Gruppen und Berechtigungen zu konfigurieren. Administratoren können die App so einrichten, dass sie sich mit einem oder mehreren LDAP-Verzeichnissen oder Active-Directories über eine LDAP-Schnittstelle verbindet. Attribute wie Speicherkontingent, E-Mail, Avatare, Gruppenmitgliedschaft usw. können von einem Verzeichnis mit den dazugehörigen Anfragen und Filtern bezogen werden\n\nDer Nutzer meldet sich an der Nextclud mit seinen LDAP oder AD Anmeldedaten an. und erhält Zugriff durch eine Authentifizierungsanfrage am LDAP- oder AD-Server. Nextcloud speichert und verwendet nicht die LDAP- oder AD-Zugangsdaten sondern verwendet eine Sitzungs-ID für die jeweilige Nutzer-ID. Weitere Infos in der \"LDAP User and Group Backend\"-Dokumentation.",
"Test Configuration" : "Testkonfiguration",
"Help" : "Hilfe",
"Groups meeting these criteria are available in %s:" : "Gruppen, auf die diese Kriterien zutreffen, sind verfügbar in %s:",
"Only these object classes:" : "Nur diese Objektklassen:",
"Only from these groups:" : "Nur aus diesen Gruppen:",
"Search groups" : "Gruppen suchen",
"Available groups" : "Verfügbare Gruppen",
"Selected groups" : "Ausgewählte Gruppen",
"Edit LDAP Query" : "LDAP-Abfrage bearbeiten",
"LDAP Filter:" : "LDAP-Filter:",
"The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.",
"Verify settings and count the groups" : "Überprüfen Sie die Einstellungen und zählen Sie die Gruppen",
"When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Benutzer basierend auf folgenden Attributen finden:",
"LDAP/AD Username:" : "LDAP-/AD-Benutzername:",
"Allows login against the LDAP/AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.",
"LDAP/AD Email Address:" : "LDAP-/AD E-Mail-Adresse:",
"Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.",
"Other Attributes:" : "Andere Attribute:",
"Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"",
"Test Loginname" : "Anmeldenamen testen",
"Verify settings" : "Einstellungen überprüfen",
"%s. Server:" : "%s. Server:",
"Add a new configuration" : "Fügen Sie eine neue Konfiguration hinzu.",
"Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren ",
"Delete the current configuration" : "Aktuelle Konfiguration löschen",
"Host" : "Host",
"You can omit the protocol, unless you require SSL. If so, start with ldaps://" : "Sie können das Protokoll auslassen, wenn sie SSL nicht benötigen. Falls doch, so starten Sie mit ldaps://",
"Port" : "Port",
"Detect Port" : "Port ermitteln",
"User DN" : "Benutzer-DN",
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "Der DN des Benutzers, mit dem der LDAP-Bind durchgeführt werden soll, z.B. uid=agent,dc=example,dc=com. Für einen anonymen Zugriff lassen Sie DN und Passwort leer.",
"Password" : "Passwort",
"For anonymous access, leave DN and Password empty." : "Lassen Sie die Felder DN und Passwort für einen anonymen Zugang leer.",
"Save Credentials" : "Zugangsdaten speichern",
"One Base DN per line" : "Einen Basis-DN pro Zeile",
"You can specify Base DN for users and groups in the Advanced tab" : " Sie können die Basis-DN für Benutzer und Gruppen im Reiter „Fortgeschritten“ angeben",
"Detect Base DN" : "Base-DN ermitteln",
"Test Base DN" : "Base DN testen",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "Verhindert automatische LDAP-Anfragen. Besser geeignet für größere Installationen, benötigt aber erweiterte LDAP-Kenntnisse.",
"Manually enter LDAP filters (recommended for large directories)" : "LDAP-Filter manuell eingeben (empfohlen für große Verzeichnisse)",
"Listing and searching for users is constrained by these criteria:" : "Auflistung und Suche nach Nutzern ist eingeschränkt durch folgende Kriterien:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "Die häufigsten Objektklassen für Benutzer sind organizationalPerson, person, user und inetOrgPerson. Wenn Sie nicht sicher, welche Objektklasse Sie wählen sollen, fragen Sie bitte Ihren Verzeichnis-Admin.",
"The filter specifies which LDAP users shall have access to the %s instance." : "Der Filter gibt an, welche LDAP-Benutzer Zugriff auf die %s-Instanz haben sollen.",
"Verify settings and count users" : "Einstellungen überprüfen und Benutzer zählen",
"Saving" : "Speichern",
"Back" : "Zurück",
"Continue" : "Fortsetzen",
"Please renew your password." : "Bitte erneuern Sie Ihr Passwort.",
"An internal error occurred." : "Es ist ein interner Fehler aufgetreten.",
"Please try again or contact your administrator." : "Bitte versuchen Sie es noch einmal oder kontaktieren Sie Ihren Administrator.",
"Current password" : "Aktuelles Passwort",
"New password" : "Neues Passwort",
"Renew password" : "Passwort erneuern",
"Wrong password." : "Falsches Passwort.",
"Cancel" : "Abbrechen",
"Server" : "Server",
"Users" : "Benutzer",
"Login Attributes" : "Anmeldeattribute",
"Groups" : "Gruppen",
"Expert" : "Experte",
"Advanced" : "Fortgeschritten",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "Warnung: Da das PHP-Modul für LDAP nicht installiert ist, wird das Backend nicht funktionieren. Bitte kontaktieren Sie Ihren Systemadministrator und bitten Sie um die Installation des Moduls.",
"Connection Settings" : "Verbindungseinstellungen",
"Configuration Active" : "Konfiguration aktiv",
"When unchecked, this configuration will be skipped." : "Konfiguration wird übersprungen, wenn nicht angehakt.",
"Backup (Replica) Host" : "Backup-Host (Kopie)",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "Geben Sie einen optionalen Backup-Host an. Es muss sich um eine Kopie des Haupt-LDAP/AD-Servers handeln.",
"Backup (Replica) Port" : "Port des Backup-Hosts (Kopie)",
"Disable Main Server" : "Hauptserver deaktivieren",
"Only connect to the replica server." : "Nur zum Replikat-Server verbinden.",
"Turn off SSL certificate validation." : "Schalten Sie die SSL-Zertifikatsprüfung aus.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "Nur für Testzwecke geeignet, sollte Standardmäßig nicht verwendet werden. Falls die Verbindung nur mit dieser Option funktioniert, importieren Sie das SSL-Zertifikat des LDAP-Servers in Ihren %s Server.",
"Cache Time-To-Live" : "Speichere Time-To-Live zwischen",
"in seconds. A change empties the cache." : "in Sekunden. Eine Änderung leert den Cache.",
"Directory Settings" : "Ordnereinstellungen",
"User Display Name Field" : "Feld für den Anzeigenamen des Benutzers",
"The LDAP attribute to use to generate the user's display name." : "Das LDAP-Attribut zur Erzeugung des Anzeigenamens des Benutzers.",
"2nd User Display Name Field" : "2. Benutzeranzeigename Feld",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "Optional. Ein hinzuzufügendes LDAP-Attribut um den Namen in Klammern anzuzeigen. Beispiel: »John Doe (john.doe@example.org)«.",
"Base User Tree" : "Basis-Benutzerbaum",
"One User Base DN per line" : "Ein Benutzer Basis-DN pro Zeile",
"User Search Attributes" : "Benutzersucheigenschaften",
"Optional; one attribute per line" : "Optional; ein Attribut pro Zeile",
"Group Display Name Field" : "Feld für den Anzeigenamen der Gruppe",
"The LDAP attribute to use to generate the groups's display name." : "Das LDAP-Attribut zur Erzeugung des Anzeigenamens der Gruppen.",
"Base Group Tree" : "Basis-Gruppenbaum",
"One Group Base DN per line" : "Ein Gruppen Basis-DN pro Zeile",
"Group Search Attributes" : "Gruppensucheigenschaften",
"Group-Member association" : "Assoziation zwischen Gruppe und Benutzer",
"Dynamic Group Member URL" : "Dynamische Gruppenmitglied URL",
"The LDAP attribute that on group objects contains an LDAP search URL that determines what objects belong to the group. (An empty setting disables dynamic group membership functionality.)" : "Ein LDAP-Attribut von Gruppenobjekten, das eine LDAP Such-URL enthält die festlegt welche Objekte zu der Gruppe gehören. (Ein leeres Feld deaktiviert die Funktion \"Dynamisch Gruppenzugehörigkeit\".)",
"Nested Groups" : "Verschachtelte Gruppen",
"When switched on, groups that contain groups are supported. (Only works if the group member attribute contains DNs.)" : "Wenn aktiviert, werden Gruppen, die Gruppen enthalten, unterstützt. (Funktioniert nur, wenn das Merkmal des Gruppenmitgliedes den Domain-Namen enthält.)",
"Paging chunksize" : "Seitenstücke (Paging chunksize)",
"Chunksize used for paged LDAP searches that may return bulky results like user or group enumeration. (Setting it 0 disables paged LDAP searches in those situations.)" : "Abschnittslänge von seitenweise angezeigten LDAP-Suchen, die bei Suchen wie etwa Benutzer- und Gruppen-Auflistungen ausufernd viele Ergebnisse liefern können (die Einstellung „0“ deaktiviert seitenweise angezeigte LDAP-Suchen in diesen Situationen).",
"Enable LDAP password changes per user" : "LDAP-Passwortänderungen pro Benutzer aktivieren",
"Allow LDAP users to change their password and allow Super Administrators and Group Administrators to change the password of their LDAP users. Only works when access control policies are configured accordingly on the LDAP server. As passwords are sent in plaintext to the LDAP server, transport encryption must be used and password hashing should be configured on the LDAP server." : "LDAP-Nutzern die Änderung ihrer Passwörter erlauben und Super-Administratoren sowie Gruppen-Administratoren die Passwortänderung ihrer LDAP-Nutzer erlauben. \nDies funktioniert nur, wenn die Zugriffsrichtlinien auf dem LDAP-Server entsprechend konfiguriert sind. Da Passwörter im Klartext an den LDAP-Server gesendet werden, muss die Transportverschlüsselung verwendet werden und das Passwort-Hashing auf dem LDAP-Server sollte konfiguriert werden.",
"(New password is sent as plain text to LDAP)" : "(Das neue Passwort wurde als einfacher Text an LDAP gesendet)",
"Default password policy DN" : "Standardmäßige Passwort-Regeln DN",
"The DN of a default password policy that will be used for password expiry handling. Works only when LDAP password changes per user are enabled and is only supported by OpenLDAP. Leave empty to disable password expiry handling." : "Die DN einer Standard-Passwort-Policy, welche für den Umgang mit ablaufenden Passwörtern verwendet wird. Dies funktioniert nur wenn Passwort-Änderungen pro Benutzer via LDAP und OpenLDAP aktiviert sind. Leer lassen, um die Passwortablaufbehandlung zu deaktivieren.",
"Special Attributes" : "Spezielle Eigenschaften",
"Quota Field" : "Kontingent-Feld",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird das Standard-Kontingent des Benutzers verwendet. Andernfalls ein LDAP/AD-Attribut eingeben.",
"Quota Default" : "Standard-Kontingent",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "Standard-Kontingent ignorieren für LDAP-Benutzer, die kein Kontingent festgelegt haben.",
"Email Field" : "E-Mail-Feld",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "E-Mail-Adresse des Benutzers aus seinem LDAP-Attribut generieren. Für Standard-Verhalten leer lassen.",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for username (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfalls tragen Sie bitte ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Standardmäßig wird der interne Benutzername aus dem UUID-Attribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [a-zA-Z0-9_.@-]. Andere Zeichen werden durch ihre ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwendet, um den Benutzer intern zu identifizieren. Er ist außerdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Beispiel für alle DAV-Dienste. Mit dieser Einstellung kann das Standardverhalten geändert werden. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus. Für die Standardeinstellung lassen Sie das Eingabefeld leer.",
"Internal Username Attribute:" : "Interne Eigenschaften des Benutzers:",
"Override UUID detection" : "UUID-Erkennung überschreiben",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Standardmäßig wird die UUID-Eigenschaft automatisch erkannt. Die UUID-Eigenschaft wird genutzt, um einen LDAP-Benutzer und Gruppen einwandfrei zu identifizieren. Außerdem wird der interne Benutzername erzeugt, der auf Eigenschaften der UUID basiert, wenn es oben nicht anders angegeben wurde. Sie müssen allerdings sicherstellen, dass Ihre gewählten Eigenschaften zur Identifikation der Benutzer und Gruppen eindeutig sind und zugeordnet werden können. Lassen Sie es frei, um es beim Standardverhalten zu belassen. Änderungen wirken sich nur auf neu gemappte (hinzugefügte) LDAP-Benutzer und -Gruppen aus.",
"UUID Attribute for Users:" : "UUID-Attribute für Benutzer:",
"UUID Attribute for Groups:" : "UUID-Attribute für Gruppen:",
"Username-LDAP User Mapping" : "LDAP-Benutzernamenzuordnung",
"Usernames are used to store and assign metadata. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Benutzernamen dienen zum Speichern und Zuweisen von Metadaten. Um Benutzer eindeutig zu identifizieren und zu erkennen, besitzt jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung des jeweiligen Benutzernamens zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzers zugeordnet. Darüber hinaus wird der DN auch zwischengespeichert, um die Interaktion über LDAP zu reduzieren, was aber nicht zur Identifikation dient. Ändert sich der DN, werden die Änderungen gefunden. Der interne Benutzername wird durchgängig verwendet. Ein Löschen der Zuordnungen führt zum systemweiten Verbleib von Restdaten. Es bleibt nicht auf eine einzelne Konfiguration beschränkt, sondern wirkt sich auf alle LDAP-Konfigurationen aus! Löschen Sie die Zuordnungen nie innerhalb einer Produktivumgebung, sondern nur in einer Test- oder Experimentierumgebung.",
"Clear Username-LDAP User Mapping" : "Lösche LDAP-Benutzernamenzuordnung",
"Clear Groupname-LDAP Group Mapping" : "Lösche LDAP-Gruppennamenzuordnung",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Standardmäßig wird der interne Benutzername aus dem UUID-Attribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [a-zA-Z0-9_.@-]. Andere Zeichen werden durch ihre ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwendet, um den Benutzer intern zu identifizieren. Er ist außerdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Beispiel für alle *DAV-Dienste. Mit dieser Einstellung kann das Standardverhalten geändert werden. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus. Für die Standardeinstellung lassen Sie das Eingabefeld leer."
},
"nplurals=2; plural=(n != 1);");
OC.L10N.register(
"user_ldap",
{
"Failed to clear the mappings." : "매핑을 비울 수 없습니다.",
"Failed to delete the server configuration" : "서버 설정을 삭제할 수 없습니다.",
"Invalid configuration: Anonymous binding is not allowed." : "설정 잘못됨: 익명 바인딩이 허용되지 않습니다.",
"Valid configuration, connection established!" : "설정 올바름, 연결되었습니다!",
"Valid configuration, but binding failed. Please check the server settings and credentials." : "설정이 올바르지만 바인딩이 실패했습니다. 서버 설정과 인증 정보를 확인하십시오.",
"Invalid configuration. Please have a look at the logs for further details." : "설정이 잘못되었습니다. 더 자세한 정보를 보려면 로그를 참조하십시오.",
"No action specified" : "동작이 지정되지 않음",
"No configuration specified" : "설정이 지정되지 않음",
"No data specified" : "데이터가 지정되지 않음",
" Could not set configuration %s" : " 설정 %s을(를) 지정할 수 없음",
"Action does not exist" : "동작이 존재하지 않음",
"Renewing …" : "갱신 중 …",
"Very weak password" : "매우 약한 암호",
"Weak password" : "약한 암호",
"So-so password" : "그저 그런 암호",
"Good password" : "좋은 암호",
"Strong password" : "매우 좋은 암호",
"The Base DN appears to be wrong" : "기본 DN이 올바르지 않습니다",
"Testing configuration…" : "설정 시험 중…",
"Configuration incorrect" : "설정 올바르지 않음",
"Configuration incomplete" : "설정 불완전함",
"Configuration OK" : "설정 올바름",
"Select groups" : "그룹 선택",
"Select object classes" : "객체 클래스 선택",
"Please check the credentials, they seem to be wrong." : "인증 정보가 잘못된 것 같습니다. 다시 확인해 주십시오.",
"Please specify the port, it could not be auto-detected." : "포트를 자동으로 감지할 수 없습니다. 포트를 입력해 주십시오.",
"Base DN could not be auto-detected, please revise credentials, host and port." : "기본 DN을 자동으로 감지할 수 없습니다. 인증 정보, 호스트, 포트를 다시 확인하십시오.",
"Could not detect Base DN, please enter it manually." : "기본 DN을 자동으로 감지할 수 없습니다. 직접 입력하십시오.",
"{nthServer}. Server" : "{nthServer}. 서버",
"No object found in the given Base DN. Please revise." : "입력한 기본 DN에서 객체를 찾을 수 없습니다. 다시 입력하십시오.",
"More than 1,000 directory entries available." : "디렉터리 항목이 1,000개 이상 존재합니다.",
"_{objectsFound} entry available within the provided Base DN_::_{objectsFound} entries available within the provided Base DN_" : ["지정한 기반 DN에서 항목 {objectsFound}개 찾음"],
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "오류가 발생했습니다. 기본 DN, 연결 설정, 인증 정보를 확인하십시오.",
"Do you really want to delete the current Server Configuration?" : "현재 서버 설정을 지우시겠습니까?",
"Confirm Deletion" : "삭제 확인",
"Mappings cleared successfully!" : "매핑을 삭제했습니다!",
"Error while clearing the mappings." : "매핑을 삭제하는 중 오류가 발생했습니다.",
"Anonymous bind is not allowed. Please provide a User DN and Password." : "익명 연결은 허용되지 않습니다. 사용자 DN과 암호를 입력하십시오.",
"LDAP Operations error. Anonymous bind might not be allowed." : "LDAP 작업 오류입니다. 익명 연결이 비활성화 되었을 수 있습니다.",
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "저장할 수 없습니다. 데이터베이스 상태를 확인하십시오. 계속하기 전에 새로 고치십시오.",
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "모드를 전환하면 자동 LDAP 질의를 활성화합니다. LDAP 크기에 따라서 시간이 걸릴 수도 있습니다. 모드를 전환하시겠습니까?",
"Mode switch" : "모드 전환",
"Select attributes" : "속성 선택",
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command-line validation):
" : "사용자를 찾을 수 없습니다. 로그인 속성과 사용자 이름을 확인하십시오. 사용한 필터(명령행에서 검증하려면 복사 및 붙여넣기):",
"User found and settings verified." : "사용자를 찾았고 설정을 확인했습니다.",
"Consider narrowing your search, as it encompassed many users, only the first one of whom will be able to log in." : "검색 범위를 좁히십시오. 현재 설정으로 여러 사용자가 검색되었으며, 최초의 사용자만 로그인할 수 있습니다.",
"An unspecified error occurred. Please check log and settings." : "지정하지 않은 오류가 발생했습니다. 로그와 설정을 확인하십시오.",
"The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "검색 필터가 잘못되었습니다. 열고 닫는 괄호 쌍이 맞지 않을 수도 있습니다. 확인 후 수정하십시오.",
"A connection error to LDAP/AD occurred. Please check host, port and credentials." : "LDAP/AD 연결 오류가 발생했습니다. 호스트, 포트, 인증 정보를 확인하십시오.",
"The \"%uid\" placeholder is missing. It will be replaced with the login name when querying LDAP/AD." : "%uid 자리 비움자가 존재하지 않습니다. LDAP/AD에 조회할 때 로그인 사용자 이름으로 대체됩니다.",
"Please provide a login name to test against" : "테스트할 로그인 사용자 이름을 입력하십시오",
"The group box was disabled, because the LDAP/AD server does not support memberOf." : "LDAP/AD 서버에서 memberOf를 지원하지 않아서 그룹 상자를 비활성화합니다.",
"Password change rejected. Hint: " : "암호 변경이 거부되었습니다. 힌트:",
"Please login with the new password" : "새 암호로 로그인하십시오",
"LDAP User backend" : "사용자 백엔드",
"Your password will expire tomorrow." : "내 암호가 내일 만료됩니다.",
"Your password will expire today." : "내 암호가 오늘 만료됩니다.",
"_Your password will expire within %n day._::_Your password will expire within %n days._" : ["내 암호가 %n일 후 만료됩니다."],
"LDAP/AD integration" : "LDAP/AD 통합",
"_%s group found_::_%s groups found_" : ["그룹 %s개 찾음"],
"_%s user found_::_%s users found_" : ["사용자 %s명 찾음"],
"Could not detect user display name attribute. Please specify it yourself in advanced LDAP settings." : "사용자 표시 이름 속성을 찾을 수 없습니다. 고급 LDAP 설정에서 직접 지정하십시오.",
"Could not find the desired feature" : "필요한 기능을 찾을 수 없음",
"Invalid Host" : "잘못된 호스트",
"LDAP user and group backend" : "LDAP 사용자 및 그룹 백엔드",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory." : "이 앱은 Nextcloud와 LDAP 기반 사용자 디렉터리를 연결합니다.",
"Test Configuration" : "설정 시험",
"Help" : "도움말",
"Groups meeting these criteria are available in %s:" : "이 조건을 만족하는 그룹은 %s에 있습니다:",
"Only these object classes:" : "다음 객체 클래스만:",
"Only from these groups:" : "다음 그룹만:",
"Search groups" : "그룹 검색",
"Available groups" : "사용 가능한 그룹",
"Selected groups" : "선택한 그룹",
"Edit LDAP Query" : "LDAP 질의 편집",
"LDAP Filter:" : "LDAP 필터:",
"The filter specifies which LDAP groups shall have access to the %s instance." : "이 필터는 %s에 접근할 수 있는 LDAP 그룹을 설정합니다.",
"Verify settings and count the groups" : "설정을 확인하고 그룹 개수 세기",
"When logging in, %s will find the user based on the following attributes:" : "로그인할 때 %s에서 다음 속성을 기반으로 사용자를 찾습니다:",
"LDAP/AD Username:" : "LDAP/AD 사용자 이름:",
"Allows login against the LDAP/AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "LDAP/AD 사용자 이름으로 로그인하는 것을 허용합니다. \"uid\" 및 \"sAMAccountName\" 중 하나이며 자동으로 감지합니다.",
"LDAP/AD Email Address:" : "LDAP/AD 이메일 주소:",
"Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "이메일 속성으로 로그인하는 것을 허용합니다. \"mail\" 및 \"mailPrimaryAddress\"를 사용할 수 있습니다.",
"Other Attributes:" : "기타 속성:",
"Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "로그인을 시도했을 때 적용할 필터를 지정합니다. \"%%uid\"는 로그인을 시도한 사용자 이름으로 대체됩니다. 예: \"uid=%%uid\"",
"Test Loginname" : "로그인 이름 테스트",
"Verify settings" : "설정 검사",
"%s. Server:" : "%s. 서버:",
"Add a new configuration" : "새 설정 추가",
"Copy current configuration into new directory binding" : "현재 설정을 새 디렉터리 바인딩으로 복사",
"Delete the current configuration" : "현재 설정 삭제",
"Host" : "호스트",
"You can omit the protocol, unless you require SSL. If so, start with ldaps://" : "SSL이 필요한 경우가 아니라면 프로토콜을 입력하지 않아도 됩니다. SSL이 필요한 경우 ldaps:// 주소를 입력하십시오",
"Port" : "포트",
"Detect Port" : "포트 감지",
"User DN" : "사용자 DN",
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "바인딩 작업을 수행할 클라이언트 사용자 DN입니다. 예를 들어서 uid=agent,dc=example,dc=com입니다. 익명 접근을 허용하려면 DN과 암호를 비워 두십시오.",
"Password" : "암호",
"For anonymous access, leave DN and Password empty." : "익명 접근을 허용하려면 DN과 암호를 비워 두십시오.",
"Save Credentials" : "인증 정보 저장",
"One Base DN per line" : "기본 DN을 한 줄에 하나씩 입력하십시오",
"You can specify Base DN for users and groups in the Advanced tab" : "고급 탭에서 사용자 및 그룹에 대한 기본 DN을 지정할 수 있습니다.",
"Detect Base DN" : "기본 DN 감지",
"Test Base DN" : "기본 DN 시험",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "자동 LDAP 요청을 줄입니다. 대형 사이트에서 유용하지만 LDAP에 관한 지식이 필요합니다.",
"Manually enter LDAP filters (recommended for large directories)" : "수동으로 LDAP 필터 입력(대형 사이트에 추천)",
"Listing and searching for users is constrained by these criteria:" : "다음 조건으로 사용자 조회 및 검색 제한:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "일반적인 객체 클래스는 organizationalPerson, person, user, inetOrgPerson입니다. 어떤 객체 클래스를 사용해야 할 지 모르겠으면 디렉터리 서비스 관리자에게 연락하십시오.",
"The filter specifies which LDAP users shall have access to the %s instance." : "이 필터는 %s에 접근할 수 있는 LDAP 사용자를 설정합니다.",
"Verify settings and count users" : "설정을 확인하고 사용자 수 계산",
"Saving" : "저장 중",
"Back" : "뒤로",
"Continue" : "계속",
"Please renew your password." : "암호를 갱신하십시오.",
"An internal error occurred." : "내부 오류가 발생했습니다.",
"Please try again or contact your administrator." : "다시 시도하거나 관리자에게 연락하십시오.",
"Current password" : "현재 암호",
"New password" : "새 암호",
"Renew password" : "암호 갱신",
"Wrong password." : "암호가 잘못되었습니다.",
"Cancel" : "취소",
"Server" : "서버",
"Users" : "사용자",
"Login Attributes" : "로그인 속성",
"Groups" : "그룹",
"Expert" : "전문가",
"Advanced" : "고급",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "경고: PHP LDAP 모듈이 비활성화되어 있거나 설치되어 있지 않습니다. 백엔드를 사용할 수 없습니다. 시스템 관리자에게 설치를 요청하십시오.",
"Connection Settings" : "연결 설정",
"Configuration Active" : "구성 활성",
"When unchecked, this configuration will be skipped." : "선택하지 않으면 이 설정을 무시합니다.",
"Backup (Replica) Host" : "백업(복제) 호스트",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "추가적인 백업 호스트를 지정합니다. 기본 LDAP/AD 서버의 복사본이어야 합니다.",
"Backup (Replica) Port" : "백업(복제) 포트",
"Disable Main Server" : "주 서버 비활성화",
"Only connect to the replica server." : "복제 서버에만 연결합니다.",
"Turn off SSL certificate validation." : "SSL 인증서 유효성 검사를 해제합니다.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "테스트 목적으로만 사용하십시오! 이 옵션을 사용해야만 연결할 수 있으면 %s 서버에 LDAP 서버의 SSL 인증서를 설치하십시오.",
"Cache Time-To-Live" : "캐시 유지 시간",
"in seconds. A change empties the cache." : "초 단위입니다. 항목 변경 시 캐시가 갱신됩니다.",
"Directory Settings" : "디렉터리 설정",
"User Display Name Field" : "사용자의 표시 이름 필드",
"The LDAP attribute to use to generate the user's display name." : "사용자 표시 이름을 생성할 때 사용할 LDAP 속성입니다.",
"2nd User Display Name Field" : "보조 사용자 표시 이름 필드",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "선택 사항입니다. 괄호 안에 추가로 표시할 정보를 포함하는 LDAP 속성입니다. 예: 홍길동(gildong.hong@example.org)",
"Base User Tree" : "기본 사용자 트리",
"One User Base DN per line" : "사용자 DN을 한 줄에 하나씩 입력하십시오",
"User Search Attributes" : "사용자 검색 속성",
"Optional; one attribute per line" : "추가적, 한 줄에 하나의 속성을 입력하십시오",
"Group Display Name Field" : "그룹의 표시 이름 필드",
"The LDAP attribute to use to generate the groups's display name." : "그룹 표시 이름을 생성할 때 사용할 LDAP 속성입니다.",
"Base Group Tree" : "기본 그룹 트리",
"One Group Base DN per line" : "그룹 기본 DN을 한 줄에 하나씩 입력하십시오",
"Group Search Attributes" : "그룹 검색 속성",
"Group-Member association" : "그룹-구성원 연결",
"Dynamic Group Member URL" : "동적 그룹 구성원 URL",
"The LDAP attribute that on group objects contains an LDAP search URL that determines what objects belong to the group. (An empty setting disables dynamic group membership functionality.)" : "그룹에 포함될 객체를 결정하는 LDAP 검색 URL을 포함하는 그룹 객체의 LDAP 속성입니다.(비워 두면 동적 그룹 구성원 기능을 사용하지 않습니다.)",
"Nested Groups" : "그룹 안의 그룹",
"When switched on, groups that contain groups are supported. (Only works if the group member attribute contains DNs.)" : "이 설정을 사용하면 그룹 안의 그룹을 지원합니다.(그룹 구성원 속성이 DN을 포함하는 경우에만 사용 가능)",
"Paging chunksize" : "페이지 청크 크기",
"Chunksize used for paged LDAP searches that may return bulky results like user or group enumeration. (Setting it 0 disables paged LDAP searches in those situations.)" : "사용자와 그룹 목록 가져오기와 같은 다량의 결과를 반환하는 페이지를 지정한 LDAP 검색에 사용할 청크 크기입니다.(0으로 설정하면 이러한 검색을 할 때 페이지를 사용하지 않습니다.)",
"Enable LDAP password changes per user" : "사용자별 LDAP 암호 변경 허용",
"Allow LDAP users to change their password and allow Super Administrators and Group Administrators to change the password of their LDAP users. Only works when access control policies are configured accordingly on the LDAP server. As passwords are sent in plaintext to the LDAP server, transport encryption must be used and password hashing should be configured on the LDAP server." : "LDAP 사용자가 암호를 변경하고 수퍼 관리자 및 그룹 관리자가 LDAP 사용자의 암호를 변경할 수 있도록 허용합니다. LDAP 서버의 접근 제어가 올바르게 설정되어 있어야 작동합니다. LDAP 서버에 평문으로 암호가 전송되기 때문에 전송 계층 암호화가 설정되어 있어야 하며 LDAP 서버에 암호 해시가 설정되어 있어야 합니다.",
"(New password is sent as plain text to LDAP)" : "(새 암호가 LDAP 서버에 평문으로 전송됨)",
"Default password policy DN" : "기본 암호 정책 DN",
"The DN of a default password policy that will be used for password expiry handling. Works only when LDAP password changes per user are enabled and is only supported by OpenLDAP. Leave empty to disable password expiry handling." : "암호 만료 처리에 사용할 기본 암호 정책 DN입니다. 사용자별 LDAP 암호 변경이 활성화되어 있어야 하며 OpenLDAP에서만 동작합니다. 암호 만료 처리를 사용하지 않으려면 비워 두십시오.",
"Special Attributes" : "특수 속성",
"Quota Field" : "할당량 필드",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "사용자의 기본 할당량을 사용하려면 비워 두십시오. 할당량 설정이 필요하면 LDAP/AD 속성을 지정하십시오.",
"Quota Default" : "기본 할당량",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "할당량 필드에 할당량이 설정되지 않은 LDAP 사용자를 위한 기본 할당량입니다.",
"Email Field" : "이메일 필드",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "LDAP 속성에서 사용자의 이메일을 설정합니다. 기본 행동을 사용하려면 비워 두십시오.",
"User Home Folder Naming Rule" : "사용자 홈 폴더 이름 규칙",
"Leave empty for username (default). Otherwise, specify an LDAP/AD attribute." : "사용자 이름을 사용하려면 비워 두십시오(기본값). 기타 경우 LDAP/AD 속성을 지정하십시오.",
"\"$home\" Placeholder Field" : "\"$home\" 자리 비움자 필드",
"Internal Username" : "내부 사용자 이름",
"Internal Username Attribute:" : "내부 사용자 이름 속성:",
"Override UUID detection" : "UUID 확인 재정의",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "기본적으로 UUID 속성은 자동적으로 감지됩니다. UUID 속성은 LDAP 사용자와 그룹을 정확히 식별하는 데 사용됩니다. 지정하지 않은 경우 내부 사용자 이름은 UUID를 기반으로 생성됩니다. 이 설정을 다시 정의하고 임의의 속성을 지정할 수 있습니다. 사용자와 그룹 모두에게 속성을 적용할 수 있고 중복된 값이 없는지 확인하십시오. 비워 두면 기본 설정을 사용합니다. 새로 추가되거나 매핑된 LDAP 사용자와 그룹에만 적용됩니다.",
"UUID Attribute for Users:" : "사용자 UUID 속성:",
"UUID Attribute for Groups:" : "그룹 UUID 속성:",
"Username-LDAP User Mapping" : "사용자 이름-LDAP 사용자 매핑",
"Clear Username-LDAP User Mapping" : "사용자 이름-LDAP 사용자 매핑 비우기",
"Clear Groupname-LDAP Group Mapping" : "그룹 이름-LDAP 그룹 매핑 비우기"
},
"nplurals=1; plural=0;");
",
"Enable LDAP password changes per user" : "Habilitar cambio de contraseñas en LDAP por el usuario",
"Allow LDAP users to change their password and allow Super Administrators and Group Administrators to change the password of their LDAP users. Only works when access control policies are configured accordingly on the LDAP server. As passwords are sent in plaintext to the LDAP server, transport encryption must be used and password hashing should be configured on the LDAP server." : "Permitir que los usuarios LDAP puedan cambiar su contraseña y permitir a los Super Administradortes y Administradores de grupo cambiar la contraseña de sus usuarios LDAP. Únicamente funciona cuando la configuración de las poiíticas de control de acceso en el servidor LDAP está alineada. Como las contraseñas son enviadas en texto plano al servidor LDAP, se debe usar encripción en el transporte y del mismo modo se debe configurar el uso de funciones de resumen en el servidor LDAP",
"(New password is sent as plain text to LDAP)" : "(La nueva contraseña se envía como texto plano a LDAP)",
"Default password policy DN" : "DN de la política predeterminada de contraseñas",
"The DN of a default password policy that will be used for password expiry handling. Works only when LDAP password changes per user are enabled and is only supported by OpenLDAP. Leave empty to disable password expiry handling." : "El DN de la política de contraseñas predeterminada que será usada para el manejo de expiración de contraseñas. Sólo funciona cuando está habilitado el cambio de contraseñas por el usuario y sólo está soportado para OpenLDAP. Déjalo en blanco para deshabilitar el manejo de expiración de contraseñas.",
"Special Attributes" : "Atributos Especiales",
"Quota Field" : "Campo de cuota",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "Dejar en blanco para usar la cuota predeterminada del usuario. En caso contrario, por favor especifica el atributo LDAP / AD.",
"Quota Default" : "Cuota predeterminada",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "Anular la cuota predeterminada para usuarios LDAP que no tienen una cuota establecida en el Campo Cuota. ",
"Email Field" : "Campo de correo electrónico",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "Establecer el correo electrónico del usuario con base en el atributo LDAP. Déjalo vacío para el comportamiento predeterminado. ",
"User Home Folder Naming Rule" : "Regla de Nomenclatura para la Carpeta Inicio del Usuario",
"Internal Username" : "Usuario interno",
"Internal Username Attribute:" : "Atributo de nombre de usuario Interno:",
"Override UUID detection" : "Anular la detección UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Por defecto, el atributo UUID se detecta automáticamente. Este atributo se usa para identificar, sin ninguna duda, a usuarios y grupos LDAP. Adicionalmente, el usuario interno se creará con base en el UUID, si no ha sido especificado otro comportamiento en la parte de arriba. Puedes anular la configuración y proporcionar el atributo que quieras. Debes asegurarte de que el atributo que quieres sea accesible por los usuarios y grupos y que sea único. Mantenlo vacío para tener el comportamiento predeterminado. Los cambios surtirán efecto sólo en los usuarios y grupos mapeados (agregados) nuevos a LDAP.",
"UUID Attribute for Users:" : "Atributo UUID para Usuarios:",
"UUID Attribute for Groups:" : "Atributo UUID para Grupos:",
"Username-LDAP User Mapping" : "Mapeo del Usuario al Usuario LDAP",
"Usernames are used to store and assign metadata. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los nombres de usuarios son usados para almacenar y asignar metadatos. Para poder identificar y reconocer usuarios con precisión, cada usuario LDAP tendrá un nombre de usuario interno. Esto requiere una correspondencia de nombre de usuario a usuario LDAP. El nombre de usuario creado tiene una correspondencia al UUID del usuario LDAP. Adicionalmente, también se manda a cache el DN para reducir las interacciones con LDAP, pero no se usa para identificación. Si el DN cambia, los cambios serán encontrados. El nombre de usuario interno se usa intensivamente. Limpiar las correspondencias dejará restos en muhcos logares. ¡Limpiar las correspondencias no es sensitivo a la configuración, afecta a todas las configuraciones LDAP! Nunca limpies las correspondencias en un ambiente de producción, solo hazlo en los ambientes de pruebas o experimentación.",
"Clear Username-LDAP User Mapping" : "Borrar el mapeo de los Usuarios a los Usuarios-LDAP",
"Clear Groupname-LDAP Group Mapping" : "Borrar el mapeo de los Nombres de grupo a los grupos-LDAP"
},"pluralForm" :"nplurals=2; plural=(n != 1);"
} OC.L10N.register(
"user_ldap",
{
"Users" : "Pengguna",
"Groups" : "Kumpulan",
"Help" : "Bantuan",
"Password" : "Kata laluan",
"Back" : "Kembali",
"Advanced" : "Maju"
},
"nplurals=1; plural=0;");
OC.L10N.register(
"user_ldap",
{
"Failed to clear the mappings." : "Löschen der Zuordnungen fehlgeschlagen.",
"Failed to delete the server configuration" : "Löschen der Serverkonfiguration fehlgeschlagen",
"Invalid configuration: Anonymous binding is not allowed." : "Die Konfiguration ist ungültig: anonymes Binden ist nicht erlaubt. ",
"Valid configuration, connection established!" : "Gültige Konfiguration, Verbindung hergestellt!",
"Valid configuration, but binding failed. Please check the server settings and credentials." : "Die Konfiguration ist gültig, aber der LDAP-Bind ist fehlgeschlagen. Bitte überprüfe die Servereinstellungen und Anmeldeinformationen. ",
"Invalid configuration. Please have a look at the logs for further details." : "Die Konfiguration ist ungültig. Weitere Einzelheiten findest Du in den Logdateien.",
"No action specified" : "Keine Aktion angegeben",
"No configuration specified" : "Keine Konfiguration angegeben",
"No data specified" : "Keine Daten angegeben",
" Could not set configuration %s" : "Die Konfiguration %s konnte nicht gesetzt werden",
"Action does not exist" : "Aktion existiert nicht",
"Renewing …" : "Erneuere…",
"Very weak password" : "Sehr schwaches Passwort",
"Weak password" : "Schwaches Passwort",
"So-so password" : "Passables Passwort",
"Good password" : "Gutes Passwort",
"Strong password" : "Starkes Passwort",
"The Base DN appears to be wrong" : "Die Base-DN scheint falsch zu sein",
"Testing configuration…" : "Teste Konfiguration…",
"Configuration incorrect" : "Konfiguration falsch",
"Configuration incomplete" : "Konfiguration unvollständig",
"Configuration OK" : "Konfiguration OK",
"Select groups" : "Gruppen auswählen",
"Select object classes" : "Objektklassen auswählen",
"Please check the credentials, they seem to be wrong." : "Bitte überprüfe die Anmeldeinformationen, sie sind anscheinend falsch.",
"Please specify the port, it could not be auto-detected." : "Bitte gib den Port an, er konnte nicht automatisch erkannt werden.",
"Base DN could not be auto-detected, please revise credentials, host and port." : "Die Base DN konnte nicht automatisch erkannt werden, bitte überprüfe die Anmeldeinformationen, den Host und den Port.",
"Could not detect Base DN, please enter it manually." : "Die Base DN konnte nicht erkannt werden, bitte manuell eingeben.",
"{nthServer}. Server" : "{nthServer}. - Server",
"No object found in the given Base DN. Please revise." : "Keine Objekte in der Base-DN gefunden, bitte überprüfen.",
"More than 1,000 directory entries available." : "Mehr als 1.000 Einträge stehen zur Verfügung.",
"_{objectsFound} entry available within the provided Base DN_::_{objectsFound} entries available within the provided Base DN_" : ["{objectsFound} Eintrag in der angegebenen Base DN verfügbar","{objectsFound} Einträge in der angegebenen Base DN verfügbar"],
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Ein Fehler ist aufgetreten. Bitte die Base DN sowie die Verbindungs- und Anmeldeeinstellungen überprüfen.",
"Do you really want to delete the current Server Configuration?" : "Möchtest Du die aktuelle Serverkonfiguration wirklich löschen?",
"Confirm Deletion" : "Löschen bestätigen",
"Mappings cleared successfully!" : "Zuordnungen erfolgreich gelöscht!",
"Error while clearing the mappings." : "Fehler beim Löschen der Zuordnungen.",
"Anonymous bind is not allowed. Please provide a User DN and Password." : "Anonymous Bind ist nicht erlaubt. Bitte eine Benutzer-DN und ein Passwort angeben.",
"LDAP Operations error. Anonymous bind might not be allowed." : "Fehler in den LDAP-Operationen. Anonymes binden ist scheinbar nicht erlaubt.",
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "Speichern fehlgeschlagen. Bitte stelle sicher, dass die Datenbank in Betrieb ist. Bitte lade vor dem Fortfahren neu.",
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "Das Umschalten des Modus ermöglicht automatische LDAP-Abfragen. Abhängig von Deiner LDAP-Größe können diese einige Zeit in Anspruch nehmen. Soll wirklich derModus gewechselt werden?",
"Mode switch" : "Modus wechseln",
"Select attributes" : "Attribute auswählen",
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command-line validation):
" : "Benutzer nicht gefunden. Bitte überprüfe Deine Anmelde-Attribute und Deinen Benutzernamen. Gültige Filter (zum Kopieren und Einfügen bei der Überprüfung auf der Kommandozeile):
",
"User found and settings verified." : "Benutzer gefunden und Einstellungen überprüft.",
"Consider narrowing your search, as it encompassed many users, only the first one of whom will be able to log in." : "Erwäge es, Deine Suche einzugrenzen, da sie viele Benutzer umfaßte. Nur der erste wird sich anmelden können.",
"An unspecified error occurred. Please check log and settings." : "Es ist ein nicht näher spezifizierter Fehler aufgetreten. Bitte prüfe die Logdatei und Einstellungen.",
"The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.",
"A connection error to LDAP/AD occurred. Please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten. Bitte Host, Port und Anmeldeinformationen überprüfen.",
"The \"%uid\" placeholder is missing. It will be replaced with the login name when querying LDAP/AD." : "Der \"%u id\" Platzhalter fehlt. Er wird durch den Anmeldenamen ersetzt, wenn LDAP/AD abgefragt wird.",
"Please provide a login name to test against" : "Bitte gib einen Benutzernamen an, um gegen diesen zu testen",
"The group box was disabled, because the LDAP/AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP/AD-Server memberOf nicht unterstützt.",
"Password change rejected. Hint: " : "Passwortändertung verweigert. Hinweis:",
"Please login with the new password" : "Bitte mit dem neuen Passwort anmelden",
"LDAP User backend" : "LDAP Benutzer-Backend",
"Your password will expire tomorrow." : "Dein Passwort läuft morgen ab",
"Your password will expire today." : "Dein Passwort läuft heute ab",
"_Your password will expire within %n day._::_Your password will expire within %n days._" : ["Dein Passwort läuft in %n Tag ab","Dein Passwort läuft in %n Tagen ab"],
"LDAP/AD integration" : "LDAP/AD-Integration",
"_%s group found_::_%s groups found_" : ["%s Gruppe gefunden","%s Gruppen gefunden"],
"_%s user found_::_%s users found_" : ["%s Benutzer gefunden","%s Benutzer gefunden"],
"Could not detect user display name attribute. Please specify it yourself in advanced LDAP settings." : "Das Anzeigename-Attribut des Benutzers konnte nicht gefunden werden. Bitte gib es selbst in den erweiterten LDAP-Einstellungen an.",
"Could not find the desired feature" : "Die gewünschte Funktion konnte nicht gefunden werden",
"Invalid Host" : "Ungültiger Host",
"LDAP user and group backend" : "LDAP Benutzer- und Gruppen-Backend",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory." : "Diese App ermöglicht es Administratoren Nextcloud mit einem LDAP-basiertem Nutzerverzeichnis zu verbinden.",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory for authentication and provisioning users, groups and user attributes. Admins can configure this application to connect to one or more LDAP directories or Active Directories via an LDAP interface. Attributes such as user quota, email, avatar pictures, group memberships and more can be pulled into Nextcloud from a directory with the appropriate queries and filters.\n\nA user logs into Nextcloud with their LDAP or AD credentials, and is granted access based on an authentication request handled by the LDAP or AD server. Nextcloud does not store LDAP or AD passwords, rather these credentials are used to authenticate a user and then Nextcloud uses a session for the user ID. More information is available in the LDAP User and Group Backend documentation." : "Diese App ermöglicht es Administratoren Nextcloud mit einem auf LDAP basierenden Nutzerverzeichnis zu verbinden um so die Anmeldung, Nutzer, Gruppen und Berechtigungen zu konfigurieren. Administratoren können die App so einrichten, dass sie sich mit einem oder mehreren LDAP-Verzeichnissen oder Active-Directories über eine LDAP-Schnittstelle verbindet. Attribute wie Speicherkontigent, E-Mail, Avatare, Gruppenmitgliedschaft usw. können von einem Verzeichnis mit den dazugehörigen Anfragen und Filtern bezogen werden\n\nDer Nutzer meldet sich an der Nextclud mit seinen LDAP oder AD Anmeldedaten an. und erhält Zugriff durch eine Authentifizierungsanfrage am LDAP- oder AD-Server. Nextcloud speichert und verwendet nicht die LDAP- oder AD-Zugangsdaten sondern verwendet eine Sitzungs-ID für die jeweilige Nutzer-ID. Weitere Infos in der \"LDAP User and Group Backend\"-Dokumentation.",
"Test Configuration" : "Testkonfiguration",
"Help" : "Hilfe",
"Groups meeting these criteria are available in %s:" : "Gruppen, auf die diese Kriterien zutreffen, sind verfügbar in %s:",
"Only these object classes:" : "Nur diese Objektklassen:",
"Only from these groups:" : "Nur aus diesen Gruppen:",
"Search groups" : "Gruppen suchen",
"Available groups" : "Verfügbare Gruppen",
"Selected groups" : "Ausgewählte Gruppen",
"Edit LDAP Query" : "LDAP-Abfrage bearbeiten",
"LDAP Filter:" : "LDAP-Filter:",
"The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.",
"Verify settings and count the groups" : "Einstellungen überprüfen und die Gruppen zählen",
"When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Benutzer basierend auf folgenden Attributen finden:",
"LDAP/AD Username:" : "LDAP-/AD-Benutzername:",
"Allows login against the LDAP/AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.",
"LDAP/AD Email Address:" : "LDAP-/AD E-Mail-Adresse:",
"Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.",
"Other Attributes:" : "Andere Attribute:",
"Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"",
"Test Loginname" : "Anmeldenamen testen",
"Verify settings" : "Einstellungen überprüfen",
"%s. Server:" : "%s. Server:",
"Add a new configuration" : "Neue Konfiguration hinzufügen",
"Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren",
"Delete the current configuration" : "Aktuelle Konfiguration löschen",
"Host" : "Host",
"You can omit the protocol, unless you require SSL. If so, start with ldaps://" : "Du kannst das Protokoll auslassen, es sei denn, Du benötigst SSL. In diesem Fall mit ldaps:// beginnen.",
"Port" : "Port",
"Detect Port" : "Port ermitteln",
"User DN" : "Benutzer-DN",
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "Der DN des Benutzers, mit dem der LDAP-Bind durchgeführt werden soll, z.B. uid=agent,dc=example,dc=com. Für anonymen Zugriff DN und Passwort leerlassen.",
"Password" : "Passwort",
"For anonymous access, leave DN and Password empty." : "Lasse die Felder DN und Passwort für anonymen Zugang leer.",
"Save Credentials" : "Zugangsdaten speichern",
"One Base DN per line" : "Einen Basis-DN pro Zeile",
"You can specify Base DN for users and groups in the Advanced tab" : "Base DN für Benutzer und Gruppen kann im Reiter „Fortgeschritten“ angegeben werden",
"Detect Base DN" : "Base DN ermitteln",
"Test Base DN" : "Base DN testen",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "Verhindert automatische LDAP-Anfragen. Besser geeignet für größere Installationen, benötigt aber erweiterte LDAP-Kenntnisse.",
"Manually enter LDAP filters (recommended for large directories)" : "LDAP-Filter manuell eingeben (empfohlen für große Verzeichnisse)",
"Listing and searching for users is constrained by these criteria:" : "Auflistung und Suche nach Nutzern ist eingeschränkt durch folgende Kriterien:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "Die häufigsten Objektklassen für Benutzer sind organizationalPerson, person, user und inetOrgPerson. Wenn Du nicht sicher bist, welche Objektklasse Du wählen sollst, frage bitte Deinen Verzeichnis-Administrator.",
"The filter specifies which LDAP users shall have access to the %s instance." : "Der Filter gibt an, welche LDAP-Benutzer Zugriff auf die %s-Instanz haben sollen.",
"Verify settings and count users" : "Einstellungen überprüfen und Benutzer zählen",
"Saving" : "Speichern",
"Back" : "Zurück",
"Continue" : "Fortsetzen",
"Please renew your password." : "Bitte erneuere Dein Passwort",
"An internal error occurred." : "Es ist ein interner Fehler aufgetreten.",
"Please try again or contact your administrator." : "Bitte versuche es noch einmal oder kontaktiere den Administrator.",
"Current password" : "Aktuelles Passwort",
"New password" : "Neues Passwort",
"Renew password" : "Bitte erneuere Dein Passwort",
"Wrong password." : "Falsches Passwort.",
"Cancel" : "Abbrechen",
"Server" : "Server",
"Users" : "Benutzer",
"Login Attributes" : "Anmelde-Attribute",
"Groups" : "Gruppen",
"Expert" : "Experte",
"Advanced" : "Fortgeschritten",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "Warnung: Da das PHP-Modul für LDAP nicht installiert ist, wird das Backend nicht funktionieren. Bitte kontaktiere Deinen Systemadministrator und bitte ihn um die Installation des Moduls.",
"Connection Settings" : "Verbindungseinstellungen",
"Configuration Active" : "Konfiguration aktiv",
"When unchecked, this configuration will be skipped." : "Konfiguration wird übersprungen, wenn nicht angehakt.",
"Backup (Replica) Host" : "Backup-Host (Kopie)",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "Gib einen optionalen Backup-Host an. Es muss sich um eine Kopie des Haupt-LDAP/AD-Servers handeln.",
"Backup (Replica) Port" : "Port des Backup-Hosts (Kopie)",
"Disable Main Server" : "Hauptserver deaktivieren",
"Only connect to the replica server." : "Nur zum Replikat-Server verbinden.",
"Turn off SSL certificate validation." : "Schalte die SSL-Zertifikatsprüfung aus.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "Nur für Testzwecke geeignet, sollte Standardmäßig nicht verwendet werden. Falls die Verbindung nur mit dieser Option funktioniert, das SSL-Zertifikat des LDAP-Servers in Deinen %s Server importieren.",
"Cache Time-To-Live" : "Speichere Time-To-Live zwischen",
"in seconds. A change empties the cache." : "in Sekunden. Eine Änderung leert den Cache.",
"Directory Settings" : "Ordnereinstellungen",
"User Display Name Field" : "Feld für den Anzeigenamen des Benutzers",
"The LDAP attribute to use to generate the user's display name." : "Das LDAP-Attribut zur Erzeugung des Anzeigenamens des Benutzers.",
"2nd User Display Name Field" : "2. Benutzeranzeigename Feld",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "Optional. Ein hinzuzufügendes LDAP-Attribut um den Namen in Klammern anzuzeigen. Beispiel: »Erika Mustermann (erika.mustermann@ Leave empty to disable password expiry handling." : "Die DN einer Standard-Passwort-Policy, welche für den Umgang mit ablaufenden Passwörtern verwendet wird. Dies funktioniert nur wenn Passwort-Änderungen pro Benutzer via LDAP und OpenLDAP aktiviert sind. Leer lassen, um die Passwortablaufbehandlung zu deaktivieren.",
"Special Attributes" : "Spezielle Eigenschaften",
"Quota Field" : "Kontingent-Feld",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird das Standard-Kontingent des Benutzers verwendet. Andernfall trage ein LDAP/AD-Attribut ein.",
"Quota Default" : "Standardkontingent",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "Standardkontingent ignorieren für Benutzer von LDAP, die kein Kontingent festgelegt haben.",
"Email Field" : "E-Mail-Feld",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "E-Mail-Adresse des Benutzers aus seinem LDAP-Attribut generieren. Für Standard-Verhalten leer lassen.",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for username (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfalls trage ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"Internal Username Attribute:" : "Attribut für interne Benutzernamen:",
"Override UUID detection" : "UUID-Erkennung überschreiben",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Standardmäßig wird die UUID-Eigenschaft automatisch erkannt. Die UUID-Eigenschaft wird genutzt, um einen LDAP-Benutzer und Gruppen einwandfrei zu identifizieren. Außerdem wird der interne Benutzername erzeugt, der auf Eigenschaften der UUID basiert, wenn es oben nicht anders angegeben wurde. Es muss allerdings sichergestellt werden, dass die gewählten Eigenschaften zur Identifikation der Benutzer und Gruppen eindeutig sind und zugeordnet werden können. Freilassen, um es beim Standardverhalten zu belassen. Änderungen wirken sich nur auf neu »gemappte« (hinzugefügte) LDAP-Benutzer und -Gruppen aus.",
"UUID Attribute for Users:" : "UUID-Attribute für Benutzer:",
"UUID Attribute for Groups:" : "UUID-Attribute für Gruppen:",
"Username-LDAP User Mapping" : "LDAP-Benutzernamenzuordnung",
"Usernames are used to store and assign metadata. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Die Benutzernamen werden genutzt, um Metadaten zuzuordnen und zu speichern. Um Benutzer eindeutig und präzise zu identifizieren, hat jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung des Benutzernamens zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzernamens zugeordnet. Zusätzlich wird der DN zwischengespeichert, um die Interaktion mit dem LDAP zu minimieren, was aber nicht der Identifikation dient. Ändert sich der DN, werden die Änderungen gefunden. Der interne Benutzername wird überall verwendet. Werden die Zuordnungen gelöscht, bleiben überall Reste zurück. Die Löschung der Zuordnungen kann nicht in der Konfiguration vorgenommen werden, beeinflusst aber die LDAP-Konfiguration! Lösche niemals die Zuordnungen in einer produktiven Umgebung. Lösche die Zuordnungen nur in einer Test- oder Experimentierumgebung.",
"Clear Username-LDAP User Mapping" : "LDAP-Benutzernamenzuordnung löschen",
"Clear Groupname-LDAP Group Mapping" : "LDAP-Gruppennamenzuordnung löschen",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Standardmäßig wird der interne Benutzername aus dem UUID-Attribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [a-zA-Z0-9_.@-]. Andere Zeichen werden durch ihre ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwendet, um den Benutzer intern zu identifizieren. Er ist außerdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Beispiel für alle *DAV-Dienste. Mit dieser Einstellung kann das Standardverhalten geändert werden. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus. Für die Standardeinstellung lasse das Eingabefeld leer."
},
"nplurals=2; plural=(n != 1);");
OC.L10N.register(
"user_ldap",
{
"_%s group found_::_%s groups found_" : ["",""],
"_%s user found_::_%s users found_" : ["",""]
},
"nplurals=2; plural=(n != 1);");
{ "translations": {
"Failed to clear the mappings." : "Gagal membersihkan pemetaan.",
"Failed to delete the server configuration" : "Gagal menghapus konfigurasi server",
"Invalid configuration: Anonymous binding is not allowed." : "Konfigurasi tidak valid: Pengikatan anonim tidak diizinkan.",
"Valid configuration, connection established!" : "Konfigurasi valid, terhubung!",
"Valid configuration, but binding failed. Please check the server settings and credentials." : "Konfigurasi valid, tetapi pengikatan gagal. Silakan periksa pengaturan peladen dan kredensial.",
"Invalid configuration. Please have a look at the logs for further details." : "Konfigurasi tidak valid. Silakan log untuk detil lebih lanjut.",
"No action specified" : "Tidak ada tindakan yang ditetapkan",
"No configuration specified" : "Tidak ada konfigurasi yang ditetapkan",
"No data specified" : "Tidak ada data yang ditetapkan",
" Could not set configuration %s" : "Tidak dapat menyetel konfigurasi %s",
"Action does not exist" : "Tidak ada tindakan",
"Renewing …" : "Memperbarui ...",
"Very weak password" : "Kata sandi sangat lemah",
"Weak password" : "Kata sandi lemah",
"So-so password" : "Kata sandi lumayan",
"Good password" : "Kata sandi baik",
"Strong password" : "Kata sandi kuat",
"The Base DN appears to be wrong" : "Base DN tampaknya salah",
"Testing configuration…" : "Menguji konfigurasi...",
"Configuration incorrect" : "Konfigurasi salah",
"Configuration incomplete" : "Konfigurasi tidak lengkap",
"Configuration OK" : "Konfigurasi Oke",
"Select groups" : "Pilih grup",
"Select object classes" : "Pilik kelas obyek",
"Please check the credentials, they seem to be wrong." : "Mohon periksa kredensial, nampaknya ada kesalahan.",
"Please specify the port, it could not be auto-detected." : "Mohon tentukan port karena tidak terdeteksi secara otomatis.",
"Base DN could not be auto-detected, please revise credentials, host and port." : "Base DN tidak terdeteksi secara otomatis, mohon periksa kembali kredensial, host dan port.",
"Could not detect Base DN, please enter it manually." : "Tidak dapat mendeteksi Base DN, mohon masukkan secara manual.",
"{nthServer}. Server" : "{nthServer}. Server",
"No object found in the given Base DN. Please revise." : "Tidak ada obyek ditemukan di Base DN yang diberikan. Mohon diperiksa kembali.",
"More than 1,000 directory entries available." : "Lebih dari 1000 entri direktori tersedia.",
"_{objectsFound} entry available within the provided Base DN_::_{objectsFound} entries available within the provided Base DN_" : ["{objectsFound} entri tersedia pada Base DN yang digunakan"],
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Terjadi kesalahan. Silakan periksa Base DN, serta pengaturan sambungan dan kredensial.",
"Do you really want to delete the current Server Configuration?" : "Apakan Anda ingin menghapus Konfigurasi Server saat ini?",
"Confirm Deletion" : "Konfirmasi Penghapusan",
"Mappings cleared successfully!" : "Pemetaan berhasil dibersihkan!",
"Error while clearing the mappings." : "Kesalahan saat membersihkan pemetaan.",
"Anonymous bind is not allowed. Please provide a User DN and Password." : "Bind anonim tidak diizinkan. Mohon berikan sebuah User DN dan Password.",
"LDAP Operations error. Anonymous bind might not be allowed." : "Kesalahan Operasi LDAP. Bind anonim tidak diizinkan.",
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "Menyimpan gagal. Mohon pastikan basis data di Operasi. Muat Ulang sebelum melanjutkan.",
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "Beralih modus akan mengaktifkan kueri LDAP secara otomatis. Hal ini memerlukan beberapa saat tergantung pada ukuran LDAP Anda. Apakah Anda tetap ingin beralih modus?",
"Mode switch" : "Beralih modus",
"Select attributes" : "Pilih atribut",
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command-line validation):
" : "Pengguna tidak ditemukan. Silahkan periksa atribut log masuk dan nama pengguna. Filter yang diterapkan (untuk validasi pada antarmuka CLI):
",
"User found and settings verified." : "Pengguna ditemukan dan pengaturan terverifikasi.",
"Consider narrowing your search, as it encompassed many users, only the first one of whom will be able to log in." : "Pertimbangkan untuk mempersempit pencarian Anda, karena meliputi banyak pengguna, hanya yang pertama yang dapat log masuk.",
"An unspecified error occurred. Please check log and settings." : "Suatu galat yang belum diketahui muncul. Silakan periksa log dan pengaturan.",
"The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Penyaring pencarian tidak sah, kemungkinan karena masalah sintaks seperti jumlah kurung buka dan tutup tidak sama. Mohon diperiksa.",
"Please provide a login name to test against" : "Mohon berikan nama login untuk mengujinya kembali",
"Password change rejected. Hint: " : "Perubahan kata sandi ditolak. Petunjuk:",
"Please login with the new password" : "Silahkan log masuk dengan kata sandi baru",
"LDAP User backend" : "Backend pengguna",
"Your password will expire tomorrow." : "Kata sandi Anda akan kedaluwarsa besok.",
"Your password will expire today." : "Kata sandi Anda akan kedaluwarsa hari ini.",
"_Your password will expire within %n day._::_Your password will expire within %n days._" : ["Kata sandi Anda akan kedaluwarsa dalam %n hari."],
"_%s group found_::_%s groups found_" : ["%s grup ditemukan"],
"_%s user found_::_%s users found_" : ["%s pengguna ditemukan"],
"Could not detect user display name attribute. Please specify it yourself in advanced LDAP settings." : "Atribut nama yang akan ditampilkan tidak terdeteksi. Silahkan tentukan Anda sendiri pada pengaturan lanjutan LDAP.",
"Could not find the desired feature" : "Tidak dapat menemukan fitur yang diinginkan",
"Invalid Host" : "Host tidak sah",
"LDAP user and group backend" : "Backend pengguna dan grup LDAP",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory." : "Aplikasi ini memungkinkan administrator menghubungkan Nextcloud dengan direktori pengguna berbasis LDAP.",
"This application enables administrators to connect Nextcloud to an LDAP-based user directory for authentication and provisioning users, groups and user attributes. Admins can configure this application to connect to one or more LDAP directories or Active Directories via an LDAP interface. Attributes such as user quota, email, avatar pictures, group memberships and more can be pulled into Nextcloud from a directory with the appropriate queries and filters.\n\nA user logs into Nextcloud with their LDAP or AD credentials, and is granted access based on an authentication request handled by the LDAP or AD server. Nextcloud does not store LDAP or AD passwords, rather these credentials are used to authenticate a user and then Nextcloud uses a session for the user ID. More information is available in the LDAP User and Group Backend documentation." : "Aplikasi ini mengizinkan administrator untuk menghubungkan Nexcloud dengan direktori pengguna berbasis LDAP, untuk otentikasi dan penyediaan atribut pengguna dan grup. Admin dapat melakukan konfigurasi untuk menghubungkan satu atau lebih LDAP atau Active Directory melalui antarmuka LDAP. Atribut seperti diantaranya, kuota, surel, gambar profil, keanggotaan grup, dan lainnya dapat ditarik ke Nextcloud dari suatu layanan direktori dengan kueri dan filter yang sesuai.\n\nPengguna akan terhubung ke Nextcloud menggunakan kredensial LDAP atau AD, dan mendapatkan akses berdasarkan permintaan autentikasi yang ditangani oleh peladen LDAP atau AD. Nextcloud tidak menyimpan kata sandi LDAP atau AD, alih-alih kredensial digunakan untuk mengautentikasi pengguna, dan berikutnya Nextcloud akan menggunakan suatu sesi bagi ID pengguna. Informasi lebih lanjut dapat dilihat pada dokumentasi LDAP User and Group Backend.",
"Test Configuration" : "Uji Konfigurasi",
"Help" : "Bantuan",
"Groups meeting these criteria are available in %s:" : "Grup yang memenuhi kriteria ini tersedia di %s:",
"Only these object classes:" : "Hanya kelas obyek berikut:",
"Only from these groups:" : "Hanya dari grup berikut:",
"Search groups" : "Pencarian grup",
"Available groups" : "Grup tersedia",
"Selected groups" : "Grup terpilih",
"Edit LDAP Query" : "Sunting Kueri LDAP",
"LDAP Filter:" : "Penyaring LDAP:",
"The filter specifies which LDAP groups shall have access to the %s instance." : "Penyaring menentukan grup LDAP mana yang memiliki akses ke %s.",
"Verify settings and count the groups" : "Verifikasi pengaturan, dan hitung jumlah grup",
"When logging in, %s will find the user based on the following attributes:" : "Pada saat login, %s akan menemukan pengguna berdasarkan atribut berikut:",
"Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Mengizinkan juga log masuk menggunakan atribut surel \"mail\" dan \"mailPrimaryAddress\".",
"Other Attributes:" : "Atribut Lain:",
"Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Definisikan penerapan filter saat percobaan log masuk. \"%%uid\" akan menggantikan nama pengguna saat aksi dilakukan. Contoh: \"uid=%%uid\"",
"Test Loginname" : "Test Loginname",
"Verify settings" : "Verifikasi setelan",
"%s. Server:" : "%s. Server:",
"Add a new configuration" : "Tambah konfigurasi baru",
"Copy current configuration into new directory binding" : "Salin konfigurasi saat ini kedalam direktori baru",
"Delete the current configuration" : "Hapus konfigurasi saat ini",
"Host" : "Host",
"You can omit the protocol, unless you require SSL. If so, start with ldaps://" : "Anda dapat mengabaikan nama protokol, kecuali dibutuhkan SSL. Jika iya, maka awali dengan ldaps://",
"Port" : "Port",
"Detect Port" : "Deteksi Port",
"User DN" : "Pengguna DN",
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "DN dari klien pengguna yang dengannya tautan akan diterapkan, mis. uid=agen,dc=contoh,dc=com. Untuk akses anonim, biarkan DN dan kata sandi kosong.",
"Password" : "Kata sandi",
"For anonymous access, leave DN and Password empty." : "Untuk akses anonim, biarkan DN dan Kata sandi kosong.",
"Save Credentials" : "Simpan kredensial",
"One Base DN per line" : "Satu Base DN per baris",
"You can specify Base DN for users and groups in the Advanced tab" : "Anda dapat menetapkan Base DN untuk pengguna dan grup dalam tab Lanjutan",
"Detect Base DN" : "Deteksi Base DN",
"Test Base DN" : "Uji Base DN",
"Avoids automatic LDAP requests. Better for bigger setups, but requires some LDAP knowledge." : "Mencegah permintaan LDAP otomatis. Berguna untuk setelan yang lebih besar, tapi memerlukan beberapa pengetahuan LDAP.",
"Manually enter LDAP filters (recommended for large directories)" : "Masukkan penyaring LDAP secara manual (direkomendasikan untuk direktori yang besar)",
"Listing and searching for users is constrained by these criteria:" : "Daftar pencarian pengguna, akan dibatasi kriteria berikut:",
"The most common object classes for users are organizationalPerson, person, user, and inetOrgPerson. If you are not sure which object class to select, please consult your directory admin." : "Kelas obyek yang umum untuk pengguna adalah organizationalPerson, person, user, dan inetOrgPerson. Jika Anda tidak yakin kelas obyek mana yang akan dipilih, silakan konsultasi dengan admin direktori Anda.",
"The filter specifies which LDAP users shall have access to the %s instance." : "Penyaring menentukan pengguna LDAP mana yang memiliki akses ke %s.",
"Verify settings and count users" : "Verifikasi setelan dan jumlah pengguna",
"Saving" : "Menyimpan",
"Back" : "Kembali",
"Continue" : "Lanjutkan",
"Please renew your password." : "Silahkan perbarui kata sandi Anda.",
"An internal error occurred." : "Terjadi kesalahan internal.",
"Please try again or contact your administrator." : "Mohon coba lagi atau hubungi administrator Anda.",
"Current password" : "Kata sandi saat ini",
"New password" : "Kata sandi baru",
"Renew password" : "Perbarui kata sandi",
"Wrong password." : "Sandi salah.",
"Cancel" : "Membatalkan",
"Server" : "Server",
"Users" : "Pengguna",
"Login Attributes" : "Atribut Login",
"Groups" : "Grup",
"Expert" : "Lanjutan",
"Advanced" : "Lanjutan",
"Warning: The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "Peringatan: Modul LDAP PHP tidak terpasang, perangkat tidak akan bekerja. Silakan minta administrator sistem untuk memasangnya.",
"Connection Settings" : "Pengaturan Koneksi",
"Configuration Active" : "Konfigurasi Aktif",
"When unchecked, this configuration will be skipped." : "Jika tidak dicentang, konfigurasi ini akan dilewati.",
"Backup (Replica) Host" : "Cadangkan (Replika) Host",
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "Berikan pilihan host cadangan. Harus merupakan replika dari server LDAP/AD utama.",
"Backup (Replica) Port" : "Cadangkan (Replika) Port",
"Disable Main Server" : "Nonaktifkan Server Utama",
"Only connect to the replica server." : "Hanya terhubung ke server replika.",
"Turn off SSL certificate validation." : "Matikan validasi sertifikat SSL.",
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "Tidak dianjurkan, gunakan ini hanya untuk percobaan! Jika koneksi hanya bekerja dengan opsi ini, impor sertifikat SSL milik server LDAP kedalam server %s Anda.",
"Cache Time-To-Live" : "Cache Time-To-Live",
"in seconds. A change empties the cache." : "dalam detik. perubahan mengosongkan cache",
"Directory Settings" : "Pengaturan Direktori",
"User Display Name Field" : "Bidang Tampilan Nama Pengguna",
"The LDAP attribute to use to generate the user's display name." : "Atribut LDAP digunakan untuk menghasilkan nama tampilan pengguna.",
"2nd User Display Name Field" : "Bidang Tampilan Nama Pengguna Kedua",
"Optional. An LDAP attribute to be added to the display name in brackets. Results in e.g. »John Doe (john.doe@example.org)«." : "Opsional. Atribut LDAP bisa ditambahkan ke nama tampilan dalam tanda kurung. Hasil dalam cth. »John Doe (john.doe@example.org)«.",
"Base User Tree" : "Base User Tree",
"One User Base DN per line" : "Satu Pengguna Base DN per baris",
"User Search Attributes" : "Atribut Pencarian Pengguna",
"Optional; one attribute per line" : "Pilihan; satu atribut per baris",
"Group Display Name Field" : "Bidang Tampilan Nama Grup",
"The LDAP attribute to use to generate the groups's display name." : "Atribut LDAP digunakan untuk menghasilkan nama tampilan grup.",
"Base Group Tree" : "Base Group Tree",
"One Group Base DN per line" : "Satu Grup Base DN per baris",
"Group Search Attributes" : "Atribut Pencarian Grup",
"Group-Member association" : "Asosiasi Anggota-Grup",
"Dynamic Group Member URL" : "URL Member Grup Dinamis",
"The LDAP attribute that on group objects contains an LDAP search URL that determines what objects belong to the group. (An empty setting disables dynamic group membership functionality.)" : "Atribut LDAP dalam objek grup mengandung URL pencarian LDAP yang menentukan apa objek yang dimiliki grup. (Pengaturan kosong menonaktifkan fungsi keanggoaan grup dinamis.)",
"Nested Groups" : "Grup Bersarang",
"When switched on, groups that contain groups are supported. (Only works if the group member attribute contains DNs.)" : "Ketika dihidupkan, grup yang berisi grup akan didukung. (Hanya bekerja jika atribut anggota grup berisi DN.)",
"Paging chunksize" : "Paging chunksize",
"Chunksize used for paged LDAP searches that may return bulky results like user or group enumeration. (Setting it 0 disables paged LDAP searches in those situations.)" : "Chunksize digunakan untuk pencarian paged LDAP yang mengembalikan hasil secara massal seperti enumerasi pengguna dan grup. (Atur dengan nilai 0 untuk menonaktifkan pencarian paged LDAP dalam situasi tersebut.)",
"Enable LDAP password changes per user" : "Aktifkan perubahan kata sandi LDAP per pengguna",
"Allow LDAP users to change their password and allow Super Administrators and Group Administrators to change the password of their LDAP users. Only works when access control policies are configured accordingly on the LDAP server. As passwords are sent in plaintext to the LDAP server, transport encryption must be used and password hashing should be configured on the LDAP server." : "Perbolehkan pengguna LDAP mengubah kata sandi mereka dan perbolehkan Administrator Super dan Administrator Grup untuk mengubah kata sandi pengguna LDAP mereka. Hanya bekerja ketika kebijaksanaan akses kontrol terconfigurasi berdasarkan server LDAP. Sebagaimana kata sandi dikirim dalam plain teks ke server LDAP, pengiriman enkripsi harus digunakan dan hashing kata sandi harus terkonfigurasi di server LDAP.",
"(New password is sent as plain text to LDAP)" : "(Kata sandi baru dikirim sebagai plain teks ke LDAP)",
"Default password policy DN" : "Kebijakan bawaan kata sandi DN",
"The DN of a default password policy that will be used for password expiry handling. Works only when LDAP password changes per user are enabled and is only supported by OpenLDAP. Leave empty to disable password expiry handling." : "Kebijakan kata sandi bawaan DN akan digunakan untuk penanganan masa kedaluwarsa. Hanya berfungsi jika perubahan kata sandi tiap pengguna diaktifkan, dan hanya mendukung OpenLDAP. Biarkan kosong untuk tidak menggunakan penanganan masa kedaluwarsa kata sandi.",
"Special Attributes" : "Atribut Khusus",
"Quota Field" : "Kolom Kuota",
"Leave empty for user's default quota. Otherwise, specify an LDAP/AD attribute." : "Biarkan kosong untuk kuota bawaan pengguna. Atau tentukan atribut LDAP/AD.",
"Quota Default" : "Kuota Baku",
"Override default quota for LDAP users who do not have a quota set in the Quota Field." : "Tetapkan kuota bawaan bagi pengguna LDAP, yang nilai kuotanya tidak ditentukan pada isian kuota.",
"Email Field" : "Kolom Email",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "Tetapkan surel pengguna menggunakan atribut LDAP. Biarkan kosong untuk menggunakan perilaku bawaan.",
"User Home Folder Naming Rule" : "Aturan Penamaan Folder Home Pengguna",
"Leave empty for username (default). Otherwise, specify an LDAP/AD attribute." : "Biarkan nama pengguna kosong (bawaan). Atau, tentukan atribut LDAP/AD.",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home pada konfigurasi penyimpanan eksternal akan diubah dengan nilai pada atribut yang ditentukan",
"Internal Username" : "Nama Pengguna Internal",
"Internal Username Attribute:" : "Atribut Nama Pengguna Internal:",
"Override UUID detection" : "Timpa deteksi UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Secara default, atribut UUID akan secara otomatis terdeteksi. Atribut UUID ini digunakan untuk mengidentifikasi pengguna dan grup LDAP yang diragukan. Nama pengguna internal juga akan